Palmgren

  • Layout
Palmgren 16” Heavy Duty Rotary Table 9634120 at Elite Metal Tools
Palmgren 16” Heavy Duty Rotary Table 9634120
  • Max Load Horizontal: 310 lbs.
  • Max Load Vertical: 133 lbs.
  • Gear Ratio: 90 to 1 in
  • Center Hole: MT-4
$3,745.00
$3,042.81
As low as $98/mo
View Details
Palmgren 2HP 230V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550
  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
$11,867.00
$11,125.31
As low as $361/mo
View Details
Palmgren 300 RPM Production-Tap Pneumatic Tapping Machine with 55" Reach 9680412 at Elite Metal Tools
Palmgren 300 RPM Production-Tap Pneumatic Tapping Machine with 55" Reach 9680412
  • Parallel arm with 8" to 55" reach
  • Torque @ 90 PSI: 30 ft/lb.
  • Max Tap Capacity/Mold Steel: 5/8
  • Max Tap Capacity/Aluminum: 3/4
$2,933.00
$2,749.69
As low as $89/mo
View Details
Palmgren 2HP 230V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684551 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684551
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
$17,333.00
$16,249.69
As low as $321/mo
View Details
Palmgren 3HP 230V Single Phase 10 Ton Electronic Pump H-Frame Hydraulic Press 9661612 at Elite Metal Tools
Palmgren 3HP 230V Single Phase 10 Ton Electronic Pump H-Frame Hydraulic Press 9661612
  • Ram Size: 10"
  • Throat Capacity: 19" x 12"
  • Largest Arbor Extension: 10"
  • Maximum Work Diameter: 19.5" x 19.5"
$3,929.00
$3,437.88
As low as $111/mo
View Details
Palmgren 400 RPM Quick-Tap Pneumatic Tapping Machine with 37” Reach 9680420 at Elite Metal Tools
Palmgren 400 RPM Quick-Tap Pneumatic Tapping Machine with 37” Reach 9680420
  • Torque @ 90 PSI: 27 ft/lb
  • Air Consumption: 24 CFM
  • Max Tap Capacity/Mold Steel: 1/2
  • Max Tap Capacity/Aluminum: 9/16
$2,133.00
$1,999.69
As low as $64/mo
View Details
Palmgren 400 RPM Shop-Tap Pneumatic Tapping Machine with 62" Reach 9680400 at Elite Metal Tools
Palmgren 400 RPM Shop-Tap Pneumatic Tapping Machine with 62" Reach 9680400
  • Motor RPM: 400
  • Torque @ 90 PSI: 27 ft/lb
  • Max Tap Capacity/Mold Steel: 1/2
  • Max Tap Capacity/Aluminum: 9/16
$2,533.00
$2,374.69
As low as $77/mo
View Details
Palmgren 10HP 230V Three Phase 22" x 80" Engine Lathe 9684556 at Elite Metal Tools
Palmgren 10HP 230V Three Phase 22" x 80" Engine Lathe 9684556
  • Swing Over Bed: 22"
  • Distance Between Centers: 80"
  • Spindle Taper: MT7
  • Spindle Bore: 4-1/8"
$38,667.00
$36,250.31
As low as $717/mo
View Details
Palmgren 1HP Single Phase 17” 16-Speed Floor Step Pulley Drill Press 9680177 at Elite Metal Tools
Palmgren 1HP Single Phase 17” 16-Speed Floor Step Pulley Drill Press 9680177
  • Voltage: 120/240
  • Amps: 10/5 A
  • Capacity Cast Iron: 5/8 in
  • RPM: 138-3476
$1,299.00
As low as $42/mo
View Details
Palmgren 1.5HP 240V Three Phase 20" 16-Speed Floor Step Pulley Drill Press 9680210 at Elite Metal Tools
Palmgren 1.5HP 240V Three Phase 20" 16-Speed Floor Step Pulley Drill Press 9680210
  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
  • Spindle Taper: MT3
  • Spindle Travel: 5 in
$1,975.00
As low as $64/mo
View Details
Palmgren 12” Heavy Duty Rotary Table 9634118 at Elite Metal Tools
Palmgren 12” Heavy Duty Rotary Table 9634118
  • Height at 0 degrees: 5.32 in
  • Gear Ratio: 90 to 1
  • Max Load Horizontal: 265 lbs.
  • Max Load Vertical: 132 lbs.
$2,012.00
$1,665.00
As low as $54/mo
View Details
Palmgren Heavy Duty Power Roller Stand 9684490 at Elite Metal Tools
Palmgren Heavy Duty Power Roller Stand 9684490
  • Heavy duty loading capacity of up to 6,600 lbs.
  • Moves material forward or backward using manual controls
  • Can make minor material movements using material jog controls
  • 9 rollers all move in unison for smooth material movements
$15,746.00
As low as $311/mo
View Details
Palmgren 1.5HP 230V Three Phase 20” Gear Head Drill Press with Foot Reversing Switch 9680243 at Elite Metal Tools
Palmgren 1.5HP 230V Three Phase 20” Gear Head Drill Press with Foot Reversing Switch 9680243
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: No
  • Number Of Speeds: 8
$7,250.00
As low as $235/mo
View Details
Palmgren 3HP 230V Three Phase 20” Tool Room Vertical Band Saw 9683120 at Elite Metal Tools
Palmgren 3HP 230V Three Phase 20” Tool Room Vertical Band Saw 9683120
  • Table Tilt: 45° Left, 15° Right
  • Throat Depth: 20 in
  • Electric Welder: 4.2 KVA
  • Grinder Motor: 1/8 HP
$9,625.00
As low as $312/mo
View Details
Palmgren 10” Rotary Cross Slide Table with Angle 9634103 at Elite Metal Tools
Palmgren 10” Rotary Cross Slide Table with Angle 9634103
  • Table Diameter: 10 in
  • Travel (X x Y): 4 x 4 in
  • Base (X x Y): 9 x 5 in
  • Height at 0 degrees: 5- 3/4 in
$1,871.00
$1,520.19
As low as $49/mo
View Details
Palmgren 1.5HP Single Phase 6" x 48" Belt 14" Disc Combination Floor Finishing Machine 9681108 at Elite Metal Tools
Palmgren 1.5HP Single Phase 6" x 48" Belt 14" Disc Combination Floor Finishing Machine 9681108
  • Volts: 115/230V
  • Amps AC: 12.5/6.25
  • Disc Speed: 1720 RPM
  • Belt SFPM: 2258 SFPM
$2,660.00
$2,493.75
As low as $81/mo
View Details
Palmgren 8" XP Bench Grinder/Pedestal Dust Collector Combo 9682079 at Elite Metal Tools
Palmgren 8" XP Bench Grinder/Pedestal Dust Collector Combo 9682079
  • Industrial grade capacitor motors
  • Dust Collection HP: 1.5
  • CFM: 472
  • Dust Container Volume: 110 Cubic Inches
$1,775.00
As low as $57/mo
View Details
Palmgren 6” VS Bench Grinder/Pedestal Dust Collector Combo 9682112 at Elite Metal Tools
Palmgren 6” VS Bench Grinder/Pedestal Dust Collector Combo 9682112
  • Length: 19-1/4 in
  • Dust Collection HP: 1.5
  • CFM: 472
  • Dust Container Volume: 110 Cubic Inches
$1,733.00
$1,675.00
As low as $54/mo
View Details
Palmgren 8” Rotary Cross Slide Table 9632803 at Elite Metal Tools
Palmgren 8” Rotary Cross Slide Table 9632803
  • Top Grad.: 360 in
  • Base Keyway: 5/8 in
  • Gear Ratio: 40:1
  • Table T-slots: 5/8 in
$1,569.00
$1,274.81
As low as $41/mo
View Details
Palmgren 2HP 460V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684552 at Elite Metal Tools
Palmgren 2HP 460V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684552
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
$17,333.00
$16,249.69
As low as $321/mo
View Details
Palmgren 1.5HP Single Phase 20" 16-Speed Floor Step Pulley Drill Press 9680209 at Elite Metal Tools
Palmgren 1.5HP Single Phase 20" 16-Speed Floor Step Pulley Drill Press 9680209
  • Voltage: 120/240
  • Amps: 10/5 A
  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
$1,799.00
As low as $58/mo
View Details
Palmgren 10” Rotary Cross Slide Table 9634102 at Elite Metal Tools
Palmgren 10” Rotary Cross Slide Table 9634102
  • Top Grad.: 360 in
  • Base Keyway: 5/8 in
  • Gear Ratio: 40:1
  • Table T-slots: 5/8 in
$1,492.00
$1,212.25
As low as $39/mo
View Details
Palmgren 3HP 220V Three Phase 13” x 40” Variable Speed Engine Lathe 9684526 at Elite Metal Tools
Palmgren 3HP 220V Three Phase 13” x 40” Variable Speed Engine Lathe 9684526
  • Total Length Of Bed: 64"
  • Spindle Bore: 1-9/16"
  • Max. Size Cutting Tool: 1/2"
  • Feed Rod Diameter: 3/4"
$23,125.00
As low as $457/mo
View Details
Palmgren 2HP 220V Three Phase 12” x 36” Variable Speed Engine Lathe 9684525 at Elite Metal Tools
Palmgren 2HP 220V Three Phase 12” x 36” Variable Speed Engine Lathe 9684525
  • Total Length Of Bed: 60"
  • Spindle Nose Mounting: Camlock D1-4
  • Spindle Bore: 1-9/16"
  • Max. Size Cutting Tool: 1/2"
$20,000.00
As low as $395/mo
View Details

Founded in 1919 and since then have been creating superior quality machines for their customers. Palmgren is located in Naperville, IL. They use innovative designs and patents to improve their metalworking machines. Some of the many machines that they sell include belt grinders, drill sharpeners, and finishing machines. 

If you are interested in belt grinders or anything else Palmgren has to offer, please contact us. Here at Elite Metal Tools we work as a team to provide our customers with the best customer service and low prices.