Kalamazoo Industries

  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor 3 phase 220/440 volt
  • Made in the USA
  • Grinder 3PH amps draws: 1.4
  • Vacuum 3PH FLA: 1.4 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
$4,250.00
$4,079.00
  • 6" x 90" Belt Grinder
  • USA MADE!
  • 6" x 24" Platen
  • VACUUM IS SOLD SEPARATELY
$6,495.00
$6,038.00
  • Capacity: 1 .5″ solids, 2 1/2″ pipe
  • 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
  • Available in 1 ph 110/220 or 3 ph 220/440
  • Swivel cam vise opens 4″ – fast, lever-lock. Work length stop

 

  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1/2 HP,1 phase 110 volt (1 HP available) 3450 RPM
  • Dimensions: 50″ high x 12″ deep x 14″ wide
  • 3615 SFPM, 120 LBS
  • Capacity 4" Solid, 6" Shapes 
  • Air Chain Vise 
  • Cast iron Upper Arm/Trunnions 
  • 20 HP Motor
$17,550.00
$17,160.00
  • Wheel: 20” or 22” (Not included)
  • Spindle: 1”
  • RPM: 2500
  • Capacities: 4″ solids, 6″ most shapes. At 45 deg: 3″ solids, 5″ most shapes.
  • OSHA safety clamshell wheel guard
  • 1" spindle, sealed ball bearings
  • Two easy-set screw vises to hold work on both sides
  • Options: #12L steel stand and AV-18 air vises
$3,400.00
$3,227.00
  • 10" High speed nonferrous saw for cutting aluminum, brass and plastic
  • 3.25" round solid capacity
  • Uses high speed carbide tipped blade (non included)
  • Single quick release cam-lock vise
$1,975.00
$1,899.00
  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1 HP,1 phase 110 volt 3450 RPM
  • Vertical or Horizontal position
  • Dimensions: 50″ high x 12″ deep x 14″ wide
$1,840.00
$1,785.00
  • 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
  • 6″ x 60″ belt, variable position, direct drive, 1 lever quick belt release!!!
  • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
  • Dimensions: L22″ x W14″ x H56″
  • Dust collector with 10″x 13″ reusable steel mesh filter.
  • 1PH FLA: 5.9 amps
  • Capacity: 400 CFM
  • Machine dimensions: L 27″ x W 18″ x H 28″
  • 7-1/2HP, 3PH motor
  • 8″x60″ belt, replaceable platen, work area 8″ x13″
  • Dimensions: L25″xW25″xH62″
  • 760 lbs
  • 10" Disc Sander
  • Vacuum Included
  • 1/2 HP Motor
  • Made in the USA
  • 24 volt at switch, 10 gal coolant tank & pump
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
  • 1750 lbs
$18,500.00
$18,107.00
  • 3PH amps: 3.6 amps
  • 24-1/2″ long steel reversible and replaceable platen.
  • Belt size: 4″ x 90″. All belt types are usable.
  • Belt speed: 7200 SFPM.
$3,995.00
$3,831.00
  • Belt sander with heavy-duty enclosed stand and vacuum dust collector
  • 3 hp , 1phase w/ vacuum
  • Reversible steel platen , 6″ x14″,cast iron frame
  • Dimensions: L 27″ x W 18″ x H 52″
$4,595.00
$4,437.00
  • Spindle Arbor Size: 1”
  • Spindle RPM: 2500
  • Capacities: 4″ solid, 6″ shapes@ 90 degrees, 3″ solid, 5″ shapes@ 45 degrees Left OR Right
  • 20HP unit amp draws: 220V 46 amps and 440V 23 amps
  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
$5,395.00
$5,174.00
  • 20" Manual Wet-Cut Abrasive Saw 
  • Cast Iron Arm, Trunnions 
  • Integral Tank And Pump 
  • 15 HP Motor
$16,350.00
$15,987.00
  • 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive
  • Cast iron table 4″ x 6″
  • DCV-6 Vacuum base 400 CFM
  • Dimensions: L 18″ x W 26″ x H 60″
$4,195.00
$4,100.00
  • 20" Abrasive Wheel
  • 1" Spindle w/ Sealed Ball Bearings
  • 2500 RPM at Spindle
  • Made in the U.S.A
  • 1PH amps: 11.5 amps
  • 24-1/2″ long steel reversible and replaceable platen.
  • Belt size: 4″ x 90″. All belt types are usable.
  • Belt speed: 7200 SFPM.
$3,995.00
$3,831.00
  • 8″ x 60″ belt, air tension, 0-50 PSI reqd
  • 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
  • Platen working surface 8″ x 13″
  • Dimensions: L 35″ x W 24″ x H 34″

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.