Kalamazoo Industries

  • Dust collector with 10″x 13″ reusable steel mesh filter.
  • 1PH FLA: 5.9 amps
  • Capacity: 400 CFM
  • Machine dimensions: L 27″ x W 18″ x H 28″
$2,181
As low as $70.88/mo

  • Spindle Arbor Size: 1”
  • Spindle RPM: 2500
  • Capacities: 4″ solid, 6″ shapes@ 90 degrees, 3″ solid, 5″ shapes@ 45 degrees Left OR Right
  • 20HP unit amp draws: 220V 46 amps and 440V 23 amps
$10,634
As low as $345.60/mo

  • 1/3 HP motor
  • 1" x 42" belt 
  • Tilt table - vertical sander only 
  • 35 lbs
$1,288
As low as $41.86/mo

  • Mounted on a DCV-6 dust collector/vacuum
  • Manual switch on saw and dust collector
  • Uses 12″ or 14″ abrasive wheels. 1″ wheel arbor
  • 4400 Spindle RPM
MSRP: $4,695
$4,585
As low as $149.01/mo

  • 10" Disc sander wit 2" x 48" belt combination
  • Multi-postion belt, work table
  • 1/2 HP, 1 PH 110 volt, TEFC motor
  • 110 lbs
$972
As low as $31.59/mo

  • 100% made in the USA
  • Spindle RPM - 4800
  • Optional steel stand #12P
  • 1/2" wheel arbor, 7" diameter abrasive wheel
$1,035
As low as $33.63/mo

  • Two Machines in one 
  • Use sander in multiple positions. Head rotates to optimum position
  • Has tilt table, contact wheel, removable platen. 5" contact wheel.
  • 350RPM. 110 volt, 1 phase. Wt: 50lbs
MSRP: $1,095
$1,007
As low as $32.72/mo

  • 2 x 2"x48" Belt Sanders
  • Combination Sander
  • Vertical or Horizontal Position
  • 1/2 HP
$1,394
As low as $45.30/mo

  • 3 HP motor 3450 RPM, 3 phase, 220 volt, manual switch, 3500 SFPM 
  • Reversible platen 6 1/2″ x 14″
  • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
  • Dimensions: L22″ x W14″ x H56″
$2,658
As low as $86.38/mo

  • 3 hp , 1phase, 220 volt
  • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot
  • 1/3 hp coolant pump & 10 gal. tank w/ baffles
  • 3450 rpm motor w/ 2800 SFPM at belt
MSRP: $4,550
$4,399
As low as $142.96/mo

  • Switch Type: Magnetic
  • Cutoff Wheel Size: 16” – 18”
  • Portable: Two Locking Casters
  • Spindle Arbor Size: 1”
$4,530
As low as $147.22/mo

  • 20" Radial Abrasive Saw
  • 2500 RPM at Spindle
  • Foot Operated Chain Vise
  • 1" Spindle Arbor
MSRP: $19,500
$18,629
As low as $368.66/mo

  • Extra-heavy Cast iron base, trunnion and arm.
  • 5HP, TEFC. 1 PH (220 Volt only) 
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
$2,966
As low as $96.39/mo

  • 100" made in USA
  • 1/2" wheel arbor, 8" abrasive wheel
  • 1PH or 3PH
  • Optional steel stand #12P
$1,204
As low as $39.13/mo

  • Stand Not Included 
  • 3 hp, 3 phase, 220 volt
  • Reversible platen 6 1/2″ x 14″
  • 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release!!!
MSRP: $2,395
$2,253
As low as $73.22/mo

  • 4″ x 36″ wet benchtop belt sander
  • 1/2 hp, 110 vac, TEFC motor
  • self contained coolant tank & pump
  • Dimensions: L20″ x W 20″ x H 12″
MSRP: $2,925
$2,758
As low as $89.63/mo

  • 7-1/2HP, 220/440 volt, 3PH motor
  • 8″x60″ belt, replaceable platen, work area 8″ x13″
  • 8″x12″ cast iron table, adjustable angle, 5/8″ slot for mitre gage
  • Dimensions: L25″xW25″xH62″
$8,109
As low as $263.54/mo

  • 1 HP , 1 phase 110 v 60 hz,  Also available in 50 hz
  • 3450 RPM  motor, 3600 SFPM.
  • Preset spring belt tension
  • Dimensions: W18″ x H17″ x D 7″
$1,049
As low as $34.09/mo

  • 26" Wet Abrasive Chop Saw
  • 1800 Spindle RPM
  • 3Phase 220Volt or 440Volt
  • 2HP
$34,709
As low as $686.89/mo

  • Wheel: 20” or 22” (Not included)
  • Spindle: 1”
  • RPM: 2500
  • Capacities: 4″ solids, 6″ most shapes. At 45 deg: 3″ solids, 5″ most shapes.
$13,691
As low as $444.95/mo

  • Heavy-duty All Steel 
  • Tilt Table, 45° Down, 15° Up 
  • Optional MG10 Mitre Gauge 
  • 10" Aluminum Disc, 5/8" Arbor 
$586
As low as $19.04/mo

  • Cast iron frame, Full OSHA safety guard, Heavy duty steel stand.
  • 3 HP motor 3450 RPM, 1 phase, 220 volt, manual switch, 3500 SFPM
  • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
  • Dimensions: L22″ x W14″ x H56″
MSRP: $2,645
$2,556
As low as $83.07/mo

  • Grinder 1PH amp draws: 5.9 amps
  • Vacuum 1PH FLA: 5.9 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,250
$4,079
As low as $132.56/mo

  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor 3 phase 220/440 volt
  • Made in the USA
$2,832
As low as $92.04/mo

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.