Kalamazoo Industries

  • 3 HP motor 3450 RPM, 3 phase, 220 volt, manual switch, 3500 SFPM 
  • Reversible platen 6 1/2″ x 14″
  • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
  • Dimensions: L22″ x W14″ x H56″
$2,658
As low as $86.38/mo
  • Grinder 1PH amp draws: 5.9 amps
  • Vacuum 1PH FLA: 5.9 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,450
$4,270
As low as $138.77/mo
  • Wheel: 20” or 22” (Not included)
  • Spindle: 1”
  • RPM: 2500
  • Capacities: 4″ solids, 6″ most shapes. At 45 deg: 3″ solids, 5″ most shapes.
$15,574
As low as $308.20/mo
  • Capacity: 1200 CFM.
  • Amp draws: 3PH 230 FLA 7.2 amps and 440 FLA 3.6 amps
  • Vacuum dimensions: 24″ x 24″, 40″ High
  • Magnetic on/off switch.
$3,063
As low as $99.54/mo
  • 3 Phase 220/440 volt
  • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change
MSRP: $4,895
$4,728
As low as $153.66/mo
  • 20" Manual Wet-Cut Abrasive Saw 
  • Cast Iron Arm, Trunnions 
  • Integral Tank And Pump 
  • 15 HP Motor
MSRP: $17,000
$16,622
As low as $328.94/mo
  • 7-1/2HP, 3PH motor
  • 8″x60″ belt, replaceable platen, work area 8″ x13″
  • Dimensions: L25″xW25″xH62″
  • 760 lbs
$10,109
As low as $328.54/mo
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor 3 phase 220/440 volt
  • Made in the USA
$2,973
As low as $96.62/mo
  • 8″ x 60″ belt, air tension, 0-50 PSI reqd
  • 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
  • Platen working surface 8″ x 13″
  • Dimensions: L 35″ x W 24″ x H 34″
$10,677
As low as $347.00/mo
  • Miters 45 Degree Left and 60 Degree Right
  • Non-Ferrous Saw
  • Dual Cam-Lock Vises
  • 5/8" Spindle Arbor
$2,699
As low as $87.71/mo
  • Capacity 4" Solid, 6" Shapes 
  • Air Chain Vise 
  • Cast iron Upper Arm/Trunnions 
  • 20 HP Motor
MSRP: $18,800
$18,382
As low as $363.77/mo
  • 12" Disc Sander
  • Vacuum Base Included
  • Table Tilts 45 Degree and up to 90 Degree
  • 1HP Motor
MSRP: $1,965
$1,903
As low as $61.84/mo
  • Stand Not Included
  • 6″ x 60″ belt sander, vertical/ horizontal
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change!!
MSRP: $2,625
$2,520
As low as $81.90/mo
  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,600
$5,370
As low as $174.52/mo
  • Wheel: 20” or 22” (Not included)
  • Spindle: 1”
  • RPM: 2500
  • Capacities: 4″ solids, 6″ most shapes. At 45 deg: 3″ solids, 5″ most shapes.
$13,898
As low as $451.68/mo
  • USA Made
  • 3" x 90" Belt
  • Multi-Position Horizontal through Vertical

 

$3,071
As low as $99.80/mo
  • 3 hp , 3 phase, 220 or 440 volt
  • 3450 rpm motor w/ 2800 SFPM at belt
  • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot
  • Full OSHA guard, heavy duty base
MSRP: $4,550
$4,399
As low as $142.96/mo
  • 24 volt at switch, 10 gal coolant tank & pump
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
  • 1750 lbs
MSRP: $19,500
$19,085
As low as $377.69/mo
  • 6" x 90" Belt Grinder
  • USA MADE!
  • 6" x 24" Platen
  • VACUUM IS SOLD SEPARATELY
MSRP: $6,800
$6,321
As low as $205.43/mo
  • 20 hp, 3 phase, 220/440/60hz
  • Work surface 14″ x 32″
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
$20,600
As low as $407.67/mo
  • OSHA safety clamshell wheel guard
  • 1" spindle, sealed ball bearings
  • Two easy-set screw vises to hold work on both sides
  • Options: #12L steel stand and AV-18 air vises
MSRP: $3,500
$3,321
As low as $107.93/mo
  • 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive
  • Cast iron table 4″ x 6″
  • DCV-6 Vacuum base 400 CFM
  • Dimensions: L 18″ x W 26″ x H 60″
MSRP: $4,350
$4,251
As low as $138.15/mo
  • 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
  • Replaceable platen
  • Platen working surface 8″ x 13″
  • Dimensions: L 35″ x W 24″ x H 34″
$9,235
As low as $300.13/mo
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor,1phase 220v 
  • Made in the USA
$3,223
As low as $104.74/mo

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.