Category
Country of Origin

JET

Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172
  • 1.61" Width
  • .051" Thickness
  • 240" Length
  • 3/4VT
MSRP: $527
$500
As low as $16.25/mo
View Details
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210 at Elite Metal Tools
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $487.29
$315
View Details
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Bright finish – 54/56 HRc for use on non-ferrous machines at high RPM
  • Replacement Blade for JET J-CK350 350mm x 2.5mm x 32mm x 180T Non Ferrous
MSRP: $881.09
$808
As low as $26.26/mo
View Details
Jet JAT-601, 1/2" Reversible Air Drill 505601 at Elite Metal Tools
Jet JAT-601, 1/2" Reversible Air Drill 505601
  • Lightweight aluminum construction
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Side-mounted, forward/reverse switch for quick and easy direction changes
  • Variable-speed throttle ramps up to maximum RPM for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $287.09
$205
View Details
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700 at Elite Metal Tools
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $636.89
$475
View Details
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155 at Elite Metal Tools
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155
MSRP: $581.12
$545
As low as $17.71/mo
View Details
Jet 2-Ton Hand Chain Hoist with 30' Lift | S90-200-30 101933 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 30' Lift | S90-200-30 101933
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $997.69
$654
As low as $21.25/mo
View Details
Jet JHJ-17-1/2L, 17-1/2-Ton Low Profile Hydraulic Bottle Jack 453318K at Elite Metal Tools
Jet JHJ-17-1/2L, 17-1/2-Ton Low Profile Hydraulic Bottle Jack 453318K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $393.79
$262
View Details
Jet JET — AFS-2ESF Washable Electrostatic Outer Filter 708724 at Elite Metal Tools
Jet JET — AFS-2ESF Washable Electrostatic Outer Filter 708724
  • Compatible with JET AFS-2000
  • Electrostatic Outer Filter
  • Long-lasting, high quality
  • Washable Electrostatic Outer Filter
  • 23.8" x 20.2" x 2.9"
MSRP: $270.26
$249
View Details
Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301 at Elite Metal Tools
Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $959.19
$632
As low as $20.54/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds 698110 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds 698110
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,947.99
$28,308
As low as $560.21/mo
View Details
Jet JLH-300WO-20 3 Ton Lever Hoist, 20' Lift with Overload Protection 376503 at Elite Metal Tools
Jet JLH-300WO-20 3 Ton Lever Hoist, 20' Lift with Overload Protection 376503
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,774.29
$1,099
As low as $35.71/mo
View Details
Jet JCT-1602, Benchtop Sand Rammer 550602 at Elite Metal Tools
Jet JCT-1602, Benchtop Sand Rammer 550602
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,596.09
$995
As low as $32.33/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894170 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894170
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,623.99
$32,410
As low as $641.39/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690541 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690541
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,758.53
$25,278
As low as $500.25/mo
View Details
Jet JAT-452, 7" Angle Grinder 505452 at Elite Metal Tools
Jet JAT-452, 7" Angle Grinder 505452
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $785.39
$545
As low as $17.71/mo
View Details
Jet JLP-600A-15, 6 Ton Lever Hoist with 15' Lift 287602 at Elite Metal Tools
Jet JLP-600A-15, 6 Ton Lever Hoist with 15' Lift 287602
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,808.39
$1,118
As low as $36.33/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $829.39
$561
As low as $18.23/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690534 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690534
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,137.07
$27,721
As low as $548.59/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO 691200 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO 691200
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,609.39
$17,355
As low as $343.45/mo
View Details
Jet JLP-150A-20SH, 1-1/2 Ton Lever Hoist, 20' Lift & Shipyard Hooks 287703 at Elite Metal Tools
Jet JLP-150A-20SH, 1-1/2 Ton Lever Hoist, 20' Lift & Shipyard Hooks 287703
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
  • Secured with Allen screws and lock nuts, the cast-steel safety latches are more durable than stamped steel latches and will not bend out of compliance with lifting regulations
  • The Weston style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear for greater load security and increased safety
MSRP: $831.59
$575
As low as $18.68/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 15' Lift | S90-150-15 101921 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 15' Lift | S90-150-15 101921
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $624.79
$450
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-100-15 133115 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-100-15 133115
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $791.99
$575
As low as $18.68/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.