Category
Country of Origin

JET

Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500 at Elite Metal Tools
Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $868.99
$575
As low as $18.68/mo
View Details
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K at Elite Metal Tools
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,310.79
$9,144
As low as $297.18/mo
View Details
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127 at Elite Metal Tools
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,623.72
$28,797
As low as $569.89/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,934.45
$27,575
As low as $545.70/mo
View Details
Jet JLH-250WO-10 2-1/2 Ton Lever Hoist, 10' Lift with Overload Protection 376401 at Elite Metal Tools
Jet JLH-250WO-10 2-1/2 Ton Lever Hoist, 10' Lift with Overload Protection 376401
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,307.89
$852
As low as $27.69/mo
View Details
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000 at Elite Metal Tools
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000
  • HSS steel
  • 62-64 HRc
  • 225 x 32 x 2mm
  • 180T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $317.56
$279
View Details
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Bright finish – 54/56 HRc for use on non-ferrous machines at high RPM
  • Replacement Blade for JET J-CK350 350mm x 2.5mm x 32mm x 180T Non Ferrous
MSRP: $881.09
$808
As low as $26.26/mo
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-500-10 133510 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-500-10 133510
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,062.49
$1,295
As low as $42.08/mo
View Details
Jet JAT-452, 7" Angle Grinder 505452 at Elite Metal Tools
Jet JAT-452, 7" Angle Grinder 505452
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $785.39
$545
As low as $17.71/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-230-010 140116 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-230-010 140116
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,343.89
$8,505
As low as $276.41/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $613.79
$455
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,974.80
$26,155
As low as $517.60/mo
View Details
Jet Stand Extension for Jet JWL-1221VS Lathe 719203A at Elite Metal Tools
Jet Stand Extension for Jet JWL-1221VS Lathe 719203A
$231
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $829.39
$561
As low as $18.23/mo
View Details
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30 101943
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,413.49
$907
As low as $29.47/mo
View Details
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000 at Elite Metal Tools
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,018.89
$5,128
As low as $166.66/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,218.26
$28,503
As low as $564.07/mo
View Details
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702 at Elite Metal Tools
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,848.79
$2,799
As low as $90.96/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,921.07
$30,459
As low as $602.78/mo
View Details
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703 at Elite Metal Tools
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,889.49
$2,799
As low as $90.96/mo
View Details
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202 at Elite Metal Tools
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $478.49
$296
View Details
Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301 at Elite Metal Tools
Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $959.19
$632
As low as $20.54/mo
View Details
Jet 2-Ton Hand Chain Hoist with 30' Lift | S90-200-30 101933 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 30' Lift | S90-200-30 101933
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $997.69
$654
As low as $21.25/mo
View Details
Jet JET — Air Powered Drawbar Kit for JTM1254VS Milling Machine 350192K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM1254VS Milling Machine 350192K
MSRP: $1,756.80
$1,460
As low as $47.45/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.