Category
Country of Origin

JET

Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,974.80
$26,155
As low as $517.60/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds 698051 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds 698051
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,406
As low as $562.15/mo
View Details
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602 at Elite Metal Tools
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,716.99
$1,619
As low as $52.61/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,893.99
$28,992
As low as $573.75/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,921.07
$30,459
As low as $602.78/mo
View Details
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703 at Elite Metal Tools
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,889.49
$2,799
As low as $90.96/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
  • TAA approved
MSRP: $3,930.29
$2,255
As low as $73.28/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,703.99
$17,425
As low as $344.84/mo
View Details
Jet JAT-630, 3/8" Reversible Angle Drill 505630 at Elite Metal Tools
Jet JAT-630, 3/8" Reversible Angle Drill 505630
  • Bottom-mounted, forward/reverse switch locks in place
  • Ergonomically Designed Grip
  • Head rotates 360° for increased versatility
  • Industrial Jacobs’s keyed chuck efficiently transfers torque when needed
  • Low profile angled head for work in tight spots
MSRP: $416.89
$280
View Details
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds 894105 at Elite Metal Tools
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds 894105
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,096.45
$25,522
As low as $505.08/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698079 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698079
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,515.72
$30,165
As low as $596.96/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,218.26
$28,503
As low as $564.07/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-50WO-15 205115 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-50WO-15 205115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $706.19
$483
View Details
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 100T for JFK350-2/4K 579043 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 100T for JFK350-2/4K 579043
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • 100T
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • The second number is the center hole diameter, 32mm
MSRP: $777.03
$725
As low as $23.56/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,758.80
$28,894
As low as $571.81/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,407.45
$27,917
As low as $552.47/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X Powerfeed & Air Power Drawbar 698073 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X Powerfeed & Air Power Drawbar 698073
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,569.72
$29,481
As low as $583.42/mo
View Details
On Sale
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $80,747.80
Was: $61,795
Now: $48,200.10
As low as $953.87/mo
View Details
Jet JTM-1254RVS with X, Y & Z Powerfeeds 698088 at Elite Metal Tools
Jet JTM-1254RVS with X, Y & Z Powerfeeds 698088
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $33,245.07
$26,325
As low as $520.97/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,213.29
$777
As low as $25.25/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690532 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690532
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,312.72
$26,402
As low as $522.49/mo
View Details
Jet JLH-250WO-20 2-1/2 Ton Lever Hoist, 20' Lift with Overload Protection 376403 at Elite Metal Tools
Jet JLH-250WO-20 2-1/2 Ton Lever Hoist, 20' Lift with Overload Protection 376403
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,593.89
$975
As low as $31.68/mo
View Details
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515 at Elite Metal Tools
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $585.19
$419
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690544 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690544
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,069.53
$27,673
As low as $547.64/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.