JET

  • Layout
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO & X Powerfeed 698114 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO & X Powerfeed 698114
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,272.26
$28,258
As low as $559.22/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-230-010 140236 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-230-010 140236
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,149.69
$5,721
As low as $185.93/mo
View Details
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $12,508.09
$7,195
As low as $233.83/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,542.26
$23,965
As low as $474.26/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698124 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698124
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,002.26
$31,735
As low as $628.03/mo
View Details
Jet JAT-601, 1/2" Reversible Air Drill 505601 at Elite Metal Tools
Jet JAT-601, 1/2" Reversible Air Drill 505601
  • Lightweight aluminum construction
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Side-mounted, forward/reverse switch for quick and easy direction changes
  • Variable-speed throttle ramps up to maximum RPM for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $287.09
$205
View Details
Jet JAT-434, 4" Aluminum Angle Grinder 505434 at Elite Metal Tools
Jet JAT-434, 4" Aluminum Angle Grinder 505434
  • Built-in regulator to adjust speed
  • Industrial bearings for durability and smooth operation
  • Lightweight aluminum housing
  • Lock off safety lever to protect against accidental startup
  • Precision beveled gears produce lower vibration and a longer operating life
MSRP: $367.39
$262
View Details
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691199 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691199
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,312.20
$20,122
As low as $398.21/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose 414725 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose 414725
  • Flexible
  • For temperatures up to 180 degrees F
  • 8 ft length
  • Hose dia 3 in.
MSRP: $675.72
$632
As low as $20.54/mo
View Details
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202 at Elite Metal Tools
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $478.49
$296
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690631 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds 690631
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,353.45
$29,053
As low as $574.95/mo
View Details
Jet JAT-630, 3/8" Reversible Angle Drill 505630 at Elite Metal Tools
Jet JAT-630, 3/8" Reversible Angle Drill 505630
  • Bottom-mounted, forward/reverse switch locks in place
  • Ergonomically Designed Grip
  • Head rotates 360° for increased versatility
  • Industrial Jacobs’s keyed chuck efficiently transfers torque when needed
  • Low profile angled head for work in tight spots
MSRP: $416.89
$280
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,415
As low as $78.48/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds 698071 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds 698071
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,704.80
$30,046
As low as $594.61/mo
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $416.89
$275
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691203 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691203
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,758.26
$21,184
As low as $419.23/mo
View Details
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127 at Elite Metal Tools
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,623.72
$29,241
As low as $578.67/mo
View Details
Jet 2-Ton Hand Chain Hoist with 15' Lift | S90-200-15 101931 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 15' Lift | S90-200-15 101931
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $721.59
$495
View Details
Jet JTM-2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691194 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691194
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $23,379.72
$18,702
As low as $370.11/mo
View Details
Jet JET — AFS-2ESF Washable Electrostatic Outer Filter 708724 at Elite Metal Tools
Jet JET — AFS-2ESF Washable Electrostatic Outer Filter 708724
  • Compatible with JET AFS-2000
  • Electrostatic Outer Filter
  • Long-lasting, high quality
  • Washable Electrostatic Outer Filter
  • 23.8" x 20.2" x 2.9"
MSRP: $270.26
$249
View Details
Jet JET — JWP208-K Replacement Knives for JWP208 Planers, Set of 4 708808 at Elite Metal Tools
Jet JET — JWP208-K Replacement Knives for JWP208 Planers, Set of 4 708808
  • Compatible with many other brand tools lets you buy these knives with confidence
  • High-speed steel construction means longer cutting life between sharpening
  • Hardened and tempered to 62-64 Rockwell
  • Precision balanced to ensure quality cuts every time
  • Set of 4
MSRP: $324.27
$289
View Details
Jet JAT-650, 800 RPM, 1/4" Screwdriver 505650 at Elite Metal Tools
Jet JAT-650, 800 RPM, 1/4" Screwdriver 505650
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $325.99
$230
View Details
Jet JTM-1254RVS with X Powerfeed 698084 at Elite Metal Tools
Jet JTM-1254RVS with X Powerfeed 698084
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,785.46
$23,410
As low as $463.28/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.