JET

  • Layout
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,397
As low as $383.86/mo
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $735.89
$499
View Details
Jet RCH-26 Rebar Cutter & Bender Replacement Head for Jet 220025 220026 at Elite Metal Tools
Jet RCH-26 Rebar Cutter & Bender Replacement Head for Jet 220025 220026
  • Cuts and bends up to 5/8 inch, grade 60 rebar for a variety of applications
  • Easier cutting with the needle bearing design reduces operator fatigue
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Replacement cutting head for RCB-25
  • Backed by our industry leading 1-Year Warranty
MSRP: $493.89
$330
View Details
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,001.72
$23,567
As low as $466.39/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690639 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690639
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,839.72
$26,471
As low as $523.86/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y-Axis Powerfeeds and USA Air Powered Draw Bar 894226 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y-Axis Powerfeeds and USA Air Powered Draw Bar 894226
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,272.80
$35,606
As low as $704.64/mo
View Details
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691205 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691205
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways
  • Hardened and ground table
MSRP: $27,163.72
$21,482
As low as $425.12/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690540 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690540
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,596.26
$23,269
As low as $460.49/mo
View Details
Jet JET — Air Powered Drawbar Kit for JTM1050/JTM125RVS 350193K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM1050/JTM125RVS 350193K
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet GH-1440-3 with Newall NMS300 DRO, Collet Closer and Taper Attachment 323418 at Elite Metal Tools
Jet GH-1440-3 with Newall NMS300 DRO, Collet Closer and Taper Attachment 323418
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $44,732.26
$35,209
As low as $696.78/mo
View Details
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060 at Elite Metal Tools
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $2,946.89
$1,738
As low as $56.48/mo
View Details
On Sale
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415 at Elite Metal Tools
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415
  • 15' Power cord length to match an electric hoist with 15' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
Was: $119
Now: $107.10
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690620 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690620
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157 at Elite Metal Tools
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157
$415
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet 1-Ton Electric Chain Hoist 3-Phase 10' Lift | 1SS-3C-10 131000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 3-Phase 10' Lift | 1SS-3C-10 131000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,115.99
$3,575
As low as $116.18/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,542
As low as $604.42/mo
View Details
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189 at Elite Metal Tools
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,229.39
$2,998
As low as $97.43/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds and Air Powered Drawbar 690650 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds and Air Powered Drawbar 690650
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,650.80
$30,745
As low as $608.44/mo
View Details
Jet JTM-1254RVS with X & Y Powerfeeds 698086 at Elite Metal Tools
Jet JTM-1254RVS with X & Y Powerfeeds 698086
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,488.26
$25,399
As low as $502.64/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690545 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690545
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,731.45
$23,369
As low as $462.47/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690548 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690548
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,083.07
$28,854
As low as $571.02/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698120 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698120
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,795
As low as $569.85/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,758.80
$29,351
As low as $580.85/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.