Category
Country of Origin

JET

Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) 691184 at Elite Metal Tools
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) 691184
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,406.53
$15,750
As low as $311.69/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690531 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690531
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,407.07
$23,494
As low as $464.94/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $681.99
$499
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,839.99
$29,676
As low as $587.28/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,579.89
$5,338
As low as $173.48/mo
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-200-10 133210 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-200-10 133210
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,088.99
$749
As low as $24.34/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698115 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698115
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,569.72
$29,481
As low as $583.42/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-460-015 144002 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-460-015 144002
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $7,922.19
$4,495
As low as $146.08/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,425
As low as $621.90/mo
View Details
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157 at Elite Metal Tools
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157
$415
View Details
Jet TS050-230-020,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140235K at Elite Metal Tools
Jet TS050-230-020,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140235K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,850.29
$6,699
As low as $217.71/mo
View Details
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$456
View Details
Jet E-1236VS With Newall DP700 DRO With Taper Attachment 892320 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO With Taper Attachment 892320
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $28,109.72
$21,833
As low as $432.07/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058
  • 58-pc Clamping Kit with Tray for 3/4" T-slots
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $310.85
$280
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet JET — Replacement Filter for JDC-510 414901 at Elite Metal Tools
Jet JET — Replacement Filter for JDC-510 414901
  • Replacement Filter for Jet JDC-510 Dust Collector
  • Shop the Jet store for all your replacement part needs
MSRP: $608.07
$560
As low as $18.20/mo
View Details
Jet JCT-3641, 2" Stroke, Hex Shank, Open Handle Chipping Hammer 550641 at Elite Metal Tools
Jet JCT-3641, 2" Stroke, Hex Shank, Open Handle Chipping Hammer 550641
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $960.29
$635
As low as $20.63/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 10' Lift TS050-460-010 Electric 2 Speed Trolley 3PH MT050-4 144001K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 10' Lift TS050-460-010 Electric 2 Speed Trolley 3PH MT050-4 144001K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,909.69
$6,731
As low as $218.75/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,893.99
$28,995
As low as $573.81/mo
View Details
Jet 2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-200WO-30 206130 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-200WO-30 206130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,673.09
$1,047
As low as $34.02/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,921.07
$30,459
As low as $602.78/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,433.72
$17,225
As low as $340.88/mo
View Details
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651 at Elite Metal Tools
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $389.39
$269
View Details
Jet JET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 220T for FK350-2/4 579038 at Elite Metal Tools
Jet JET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 220T for FK350-2/4 579038
  • HSS Steam tempered steel
  • 62/64 HRc
  • 350 x 32 x 5mm
  • 220 teeth
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $855.46
$797
As low as $25.90/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.