JET

  • Layout
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,419.09
$6,579
As low as $213.81/mo
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,207.69
$1,399
As low as $45.46/mo
View Details
Jet Comparator Bracket for Jet JWL-1840CB Lathe 719601 at Elite Metal Tools
Jet Comparator Bracket for Jet JWL-1840CB Lathe 719601
  • Include headstock bracket, tailstock bracket, both centers, and all needed hardware
MSRP: $270.26
$245
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $7,925.49
$4,554
As low as $148.00/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $72,639.26
$56,999
As low as $1,128.01/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO & X Powerfeed 690535 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO & X Powerfeed 690535
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,393.53
$23,121
As low as $457.56/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $619.29
$456
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691170 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691170
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $31,082.80
$25,180
As low as $498.31/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 180 degrees 414735 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 180 degrees 414735
  • Flexible
  • For temperatures up to 180 degrees F
  • 8 ft length
  • Hose dia 2 in.
MSRP: $648.66
$605
As low as $19.66/mo
View Details
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157 at Elite Metal Tools
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157
$415
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690641 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690641
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,731.72
$27,861
As low as $551.36/mo
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-200-30 133230 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-200-30 133230
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,676.39
$1,049
As low as $34.09/mo
View Details
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002
  • HSS steel
  • 62-64 HRc
  • 225mm
  • 120T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $312.17
$284
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,597.07
$35,110
As low as $694.82/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,231.66
$27,494
As low as $544.10/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,921.07
$30,939
As low as $612.28/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690525 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690525
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,731.45
$23,369
As low as $462.47/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE EGH-1740 and EGH-1760 892156 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE EGH-1740 and EGH-1760 892156
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $3,581.26
$2,885
As low as $93.76/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892318 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892318
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $34,461.45
$27,662
As low as $547.43/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds 698080 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds 698080
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,839.99
$30,145
As low as $596.56/mo
View Details
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Bright finish – 54/56 HRc for use on non-ferrous machines at high RPM
  • Replacement Blade for JET J-CK350 350mm x 2.5mm x 32mm x 180T Non Ferrous
MSRP: $881.09
$808
As low as $26.26/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690645
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,407.45
$28,358
As low as $561.20/mo
View Details
Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,406.53
$16,015
As low as $316.93/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.