Category
Country of Origin

JET

Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690408 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690408
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,947.45
$20,265
As low as $401.04/mo
View Details
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K
MSRP: $1,756.80
$1,460
As low as $47.45/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894314 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894314
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894354 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894354
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,299.72
$32,902
As low as $651.13/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,678.26
$35,346
As low as $699.49/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-500WO-30 208130 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-500WO-30 208130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $2,756.59
$1,638
As low as $53.23/mo
View Details
Jet JTM-4VS Mill With X, Y and Z-Axis Powerfeeds 690013 at Elite Metal Tools
Jet JTM-4VS Mill With X, Y and Z-Axis Powerfeeds 690013
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,974.26
$17,620
As low as $348.69/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO and X-Axis Table Powerfeed 350136 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO and X-Axis Table Powerfeed 350136
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $11,243.86
$8,695
As low as $282.58/mo
View Details
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B at Elite Metal Tools
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B
  • Includes 30 Micron filter bag and 5 clear plastic collection bags
MSRP: $229.67
$220
View Details
Jet JET — Digital Readout for Drum Sander JWDS-2244/2550 723552 at Elite Metal Tools
Jet JET — Digital Readout for Drum Sander JWDS-2244/2550 723552
  • Mounting hardware included
  • Simple operation
  • For JWDS-2244, JWDS-2244OSC, and JWDS-2550 JET drum sanders
MSRP: $297.32
$275
View Details
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed 690601 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed 690601
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $27,704.26
$21,539
As low as $426.25/mo
View Details
Jet JET — Outfeed Roller Table for ECB-1422V 891163 at Elite Metal Tools
Jet JET — Outfeed Roller Table for ECB-1422V 891163
  • 4 Rollers
  • 40" x 25.2" Roller Capacity (L x W)
  • 27-1/2" - 30-1/8" Roller to Floor Height
  • 3306 lbs. Capacity Load
  • Steel
MSRP: $3,473.13
$2,805
As low as $91.16/mo
View Details
Jet 1-Ton Electric Chain Hoist 3-Phase 15' Lift | 1SS-3C-15 131500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 3-Phase 15' Lift | 1SS-3C-15 131500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,985.09
$3,480
As low as $113.10/mo
View Details
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187 at Elite Metal Tools
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,593.59
$2,620
As low as $85.15/mo
View Details
Jet TS100-230-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140237K at Elite Metal Tools
Jet TS100-230-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140237K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,331.99
$7,460
As low as $242.45/mo
View Details
Jet Spider for 2" Spindle Bore 650226 at Elite Metal Tools
Jet Spider for 2" Spindle Bore 650226
  • Gun-smithing spider adds functionality to the JET GH-1440B lathe
MSRP: $229.67
$214
View Details
Jet SJ-10T, 10-Ton Screw Jack 441310 at Elite Metal Tools
Jet SJ-10T, 10-Ton Screw Jack 441310
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $325.59
$235
View Details
Jet Lathe Guard for JET 1640EVS, 1840EVS, & 1840DVR Lathes 719002 at Elite Metal Tools
Jet Lathe Guard for JET 1640EVS, 1840EVS, & 1840DVR Lathes 719002
  • Fits JET 1640EVS, 1840EVS, and 1840DVR Lathes
MSRP: $229.67
$225
View Details
Jet Mill With 3-Axis ACU-RITE 200S DRO (Quill) and X-Axis Powerfeeds - (JTM-4VS) 690221 at Elite Metal Tools
Jet Mill With 3-Axis ACU-RITE 200S DRO (Quill) and X-Axis Powerfeeds - (JTM-4VS) 690221
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,595.99
$19,290
As low as $381.74/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-230-010 140127 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-230-010 140127
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $18,695.59
$10,375
As low as $337.18/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690140 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690140
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,028.53
$21,045
As low as $416.48/mo
View Details
Jet PUC-3819, Resin Flat Top Utility Cart 141011 at Elite Metal Tools
Jet PUC-3819, Resin Flat Top Utility Cart 141011
  • 5 inch quiet, non-marking casters
  • Handle includes built-in storage bins for versatility
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • 550 pounds of carrying capacity
  • Backed by our industry leading 2-Year Warranty
MSRP: $359.69
$240
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690164 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690164
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,920.80
$26,840
As low as $531.16/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $44,597.07
$34,495
As low as $682.65/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.