Category
Country of Origin

JET

Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K at Elite Metal Tools
Jet TS200-230-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140094K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,887.19
$9,441
As low as $306.83/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690412 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690412
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,569.07
$21,440
As low as $424.29/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894369 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894369
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square knee ways and cross ways
  • Heavy-duty spindle brake
MSRP: $30,812.53
$24,590
As low as $486.63/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894368 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894368
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 3 in dia x 8 ft length, max 130 degrees 414720 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 3 in dia x 8 ft length, max 130 degrees 414720
  • Flexible
  • For temperatures up to 130 degrees F
  • 8 ft length
  • Hose dia 3 in.
MSRP: $378.39
$335
View Details
Jet JET — FB-650-5M Replacement 5 Micron Filter Bag for DC650 Dust Collector 708701 at Elite Metal Tools
Jet JET — FB-650-5M Replacement 5 Micron Filter Bag for DC650 Dust Collector 708701
  • Fits JET DC-650 units
  • These bags are especially effective for sanding and other applications that produce fine dust.
$220
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,921.45
$34,075
As low as $674.34/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X,Y&Z Powerfeeds & Air Power Drawbar 698119 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X,Y&Z Powerfeeds & Air Power Drawbar 698119
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
  • Spindle brake for rapid stopping of the spindle
MSRP: $41,218.53
$32,120
As low as $635.65/mo
View Details
Jet E-1340VS With Collet Closer 892401 at Elite Metal Tools
Jet E-1340VS With Collet Closer 892401
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,542.26
$23,592
As low as $466.88/mo
View Details
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $14,638.79
$8,195
As low as $266.33/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,127.99
$4,135
As low as $134.38/mo
View Details
Jet 32" x 24" Cast Iron Table 737002 at Elite Metal Tools
Jet 32" x 24" Cast Iron Table 737002
  • 88 pound table creates solid work surface for all routing applications
  • Cast iron construction
  • Large table footprint with space for all routing applications
  • Precision machined cast iron construction
MSRP: $945.99
$836
As low as $27.17/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,624.26
$37,169
As low as $735.57/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,433.72
$17,230
As low as $340.98/mo
View Details
Jet JET Woodturning Carbide Hollowing Chisels Set 5PC 719902 at Elite Metal Tools
Jet JET Woodturning Carbide Hollowing Chisels Set 5PC 719902
  • JET Carbide Hollowing Chisels Set includes 3 interchangeable radius for hollowing while works on the lathe
  • Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
MSRP: $337.80
$306
View Details
Jet JVM-836-3 Mill With DP700-DRO With X-Axis Powerfeed 691180 at Elite Metal Tools
Jet JVM-836-3 Mill With DP700-DRO With X-Axis Powerfeed 691180
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,001.07
$15,465
As low as $306.05/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,839.99
$29,676.48
As low as $587.29/mo
View Details
Jet JVM-836-1 Mill With Newall DP700 DRO 691173 at Elite Metal Tools
Jet JVM-836-1 Mill With Newall DP700 DRO 691173
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $18,649.72
$14,346
As low as $466.24/mo
View Details
Jet JET — Z-Axis Table Powerfeed for 350196 at Elite Metal Tools
Jet JET — Z-Axis Table Powerfeed for 350196
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,391.93
$1,174
As low as $38.15/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $44,597.07
$34,564
As low as $684.02/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO 892453 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO 892453
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,326.26
$27,135
As low as $537.00/mo
View Details
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020 at Elite Metal Tools
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $520.29
$318
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,082.26
$16,255
As low as $321.68/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.