JET

  • Layout
Jet BDB-1340A With Newall DP700 DRO 321130 at Elite Metal Tools
Jet BDB-1340A With Newall DP700 DRO 321130
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $18,379.45
$14,373
As low as $467.12/mo
View Details
Jet JET — Taper Attachment for W Series and GH1440 321520 at Elite Metal Tools
Jet JET — Taper Attachment for W Series and GH1440 321520
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
MSRP: $5,270.53
$4,267
As low as $138.67/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$38,253
As low as $757.02/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,921.45
$34,613
As low as $684.99/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $44,597.07
$35,110
As low as $694.82/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690412 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690412
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,569.07
$21,780
As low as $431.02/mo
View Details
Jet BDB-1340A With Taper Attachment 321120 at Elite Metal Tools
Jet BDB-1340A With Taper Attachment 321120
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $18,919.99
$14,770
As low as $480.02/mo
View Details
Jet JET — Outfeed Roller Table for ECB-1422V 891163 at Elite Metal Tools
Jet JET — Outfeed Roller Table for ECB-1422V 891163
  • 4 Rollers
  • 40" x 25.2" Roller Capacity (L x W)
  • 27-1/2" - 30-1/8" Roller to Floor Height
  • 3306 lbs. Capacity Load
  • Steel
MSRP: $3,473.13
$2,805
As low as $91.16/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO 892311 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO 892311
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $25,001.45
$19,893
As low as $393.68/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $19,463.39
$10,945
As low as $355.71/mo
View Details
Jet 5SS-3C-20, 5-Ton Electric Chain Hoist 3-Phase 20' lift 530200 at Elite Metal Tools
Jet 5SS-3C-20, 5-Ton Electric Chain Hoist 3-Phase 20' lift 530200
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $13,140.59
$7,484
As low as $243.23/mo
View Details
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421 at Elite Metal Tools
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $252.99
$189
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894434 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894434
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $52,029.99
$41,728
As low as $825.79/mo
View Details
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Taper Attachment 323417 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Taper Attachment 323417
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,029.07
$29,549
As low as $584.77/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,624.26
$37,756
As low as $747.19/mo
View Details
Jet E-1340VS With Collet Closer 892401 at Elite Metal Tools
Jet E-1340VS With Collet Closer 892401
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,542.26
$23,965
As low as $474.26/mo
View Details
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $14,638.79
$8,245
As low as $267.96/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,082.26
$16,511
As low as $326.75/mo
View Details
On Sale
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,023.49
Was: $4,081
Now: $2,040.50
As low as $66.31/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Taper Attachment, 3HP 311450 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Taper Attachment, 3HP 311450
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $30,947.72
$25,081
As low as $496.35/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,127.99
$4,135
As low as $134.38/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,713
As low as $686.97/mo
View Details
Jet JTM-1 Mill With Newall DP700 DRO 691187 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP700 DRO 691187
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,082.26
$16,511
As low as $326.75/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,475.53
$35,755
As low as $707.59/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.