JET

Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill 351050

Easy to read internal depth gauge
Full power to the cutting tools through Variable Speed geared head
Heavy-duty design allows for a variety of precision drilling applications
Mill Drill Stand, p/n 350045, shown in some images, is optional
Milling table allows for movement

$10,014.29

$8,139.00

As low as $264/mo

View Details

Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed 690601

Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

$23,692.86

$18,999.00

As low as $375/mo

View Details

Jet HBS-56S, 5" x 6" Horizontal Mitering Bandsaw 414457

Adjustable Material Stop
Ball bearing supported blade wheel
Deluxe enclosed stand with wheels and handle for easy movement
Fully adjustable hydraulic downfeed system
Mitering head swivels to cut any angle 0° - 60° while the work piece remains secured

$1,652.11

$1,335.00

As low as $43/mo

View Details

Jet JTM-1254RVS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690020

Adjustable gibs throughout
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Precision bored and honed milling head
Precision hardened and ground ways and table

$23,046.57

$18,759.00

As low as $371/mo

View Details

Jet ESR-1650-3T, 50" x 16 Gauge Electric Slip Roll 3Ph 756028

All electrical and rotating parts are designed for safety and ease of use
Cast iron frame
Convenient foot-control assembly with emergency-button
Easy to setup and operate
Forming roll has attached position scale for equal pressure adjustment

$6,155.21

$5,069.00

As low as $164/mo

View Details

Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145

Calibrated fine down feed built in
CSA/CUS Certified
Easy to read internal depth gauge
Full power to the cutting tools through 6 speed geared head
Heavy-duty design allows for a variety of precision drilling applications

$11,202.68

$8,999.00

As low as $292/mo

View Details

Jet JMD-15 Mill/Drill With NEWALL DP700 DRO 350125

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read external depth gauge

$6,596.57

$5,344.99

As low as $173/mo

View Details

Jet VBS-1408, 14" Vertical Bandsaw 414483

1/4" x 14/18VT Bi-metal blade
Bi-Metal blade welder, grinder, and cutter
Blade and tire cleaning brush
Blade welder, grinder, and cutter
Easy to read blade tension indicator

$7,417.14

$6,049.00

As low as $196/mo

View Details

Jet JVM-836-3 Mill With X-Axis Powerfeed 690174

Graduated scale on column
Hardened and ground precision table
Head tilts left or right
High precision spindle bearings
Large Diameter quill is chromed

$12,678.57

$10,479.00

As low as $340/mo

View Details

Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$8,627.14

$7,099.00

As low as $230/mo

View Details

Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558

Front legs feature leveling pads
Fully adjustable ball bearing blade guides
Hardened Ferrous 82-130 SFPM
Quick speed changes with the turn of a dial, no more belt changes
Variable Speed gives you the ability to cut various material

$1,701.14

$1,379.00

As low as $44/mo

View Details

Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$8,107.14

$6,689.00

As low as $217/mo

View Details

Jet JTM-949EVS/230 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690575

Adjustable gibs throughout
Class 7 bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Internal coolant tank built into casting base

$48,711.63

$39,649.00

As low as $784/mo

View Details

Jet HBS-1220MSA, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw 424476

Automatic blade breakage sensor detects accidental breakage and interrupts the power
Auxiliary roller support on back of vise
Blade is fully guarded for Operator safety
Built-in, self-propelled blade brush prevents chip build up in blade guides
Circulating coolant system through both blade guides

$19,164.23

$15,599.00

As low as $308/mo

View Details

Jet JTM-949EVS/230 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690576

Adjustable gibs throughout
Class 7 bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Internal coolant tank built into casting base

$56,553.08

$46,031.99

As low as $910/mo

View Details

Jet J-7020, 10" x 16" Horizontal Bandsaw 414472

Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
Adjustable Material Stop
Cast iron blade wheels
Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
Patented 3-Jaw vise with rapid action moveable jaw for faster set up

$8,553.84

$6,989.00

As low as $227/mo

View Details

Jet J-3230, 5" x 8" Horizontal Bandsaw 414453

Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
Adjustable Material Stop
Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
Blade guides with side eccentric shaft with ball bearings
Fully adjustable hydraulic downfeed system

$1,840.00

$1,499.00

As low as $48/mo

View Details

Jet JMD-18 Mill/Drill With Newall DP700 DRO and X-Axis Table Powerfeed 350127

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$8,833.20

$7,189.00

As low as $233/mo

View Details

Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 DRO 351140

Calibrated fine down feed built in
CSA/CUS Certified
Easy to read internal depth gauge
Full power to the cutting tools through 6 speed geared head
Heavy-duty design allows for a variety of precision drilling applications

$10,477.35

$8,629.00

As low as $280/mo

View Details

Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Axis Powerfeed 351163

Easy to read internal depth gauge
Full power to the cutting tools through Variable Speed geared head
Heavy-duty design allows for a variety of precision drilling applications
Mill Drill Stand, p/n 350045, shown in some images, is optional
Milling table allows for movement

$14,222.86

$11,649.00

As low as $378/mo

View Details

Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467

Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
Adjustable Material Stop
Convenient control panel with overload protection
Fully adjustable hydraulic downfeed system
Heavy-duty cast iron saw head and sturdy base

$5,625.71

$4,599.00

As low as $149/mo

View Details

Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690632

Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

$30,454.76

$24,599.00

As low as $486/mo

View Details

Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469

Adjustable Material Stop
Built-in, self-propelled blade brush extends blade life
Carbide blade guides feature parallel double-row ball bearing support
Coolant is distributed through the blade guides
Electronically controlled blade speed from 82 - 330 SFPM

$8,088.57

$6,599.00

As low as $214/mo

View Details

Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO 350135

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$7,982.22

$6,479.00

As low as $210/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.