JET

  • Layout
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477 at Elite Metal Tools
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed with separate on/off control valve
$10,195.71
$8,299.00
As low as $269/mo
View Details
Jet HBS-1220MSAH, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw with Hydraulic Vise 424475 at Elite Metal Tools
Jet HBS-1220MSAH, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw with Hydraulic Vise 424475
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
  • Auxiliary roller support on back of vise
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Circulating coolant system through both blade guides
$20,024.29
$16,299.00
As low as $322/mo
View Details
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476 at Elite Metal Tools
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$17,510.00
$14,289.00
As low as $464/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$6,552.00
$4,110.20
As low as $133/mo
View Details
Jet J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw 414484 at Elite Metal Tools
Jet J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw 414484
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$12,239.52
$9,999.00
As low as $324/mo
View Details
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$7,028.00
$4,486.98
As low as $145/mo
View Details
Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322 at Elite Metal Tools
Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
$328.00
$216.00
View Details
Jet JAT-731, 6" Random Orbital Palm Sander 505731 at Elite Metal Tools
Jet JAT-731, 6" Random Orbital Palm Sander 505731
  • Ergonomically Designed Grip
  • Exhaust silencer provides quiet operation
  • Hook and loop sanding pads allow for rapid abrasive changes, reducing downtime
  • Impact resistant composite housing reduces tool weight, improving balance and reduces user fatigue
  • Random orbit sander with a balanced sanding pad for swirl-free finishes
$278.00
$190.99
View Details
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476-4 at Elite Metal Tools
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476-4
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$17,510.00
$14,289.00
As low as $464/mo
View Details
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475 at Elite Metal Tools
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
$11,685.71
$9,569.00
As low as $310/mo
View Details
Jet JTJ-2ST, 2 Ton Hydraulic Toe Jack 454502 at Elite Metal Tools
Jet JTJ-2ST, 2 Ton Hydraulic Toe Jack 454502
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
$450.00
$288.00
View Details
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500 at Elite Metal Tools
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$6,408.00
$4,086.00
As low as $132/mo
View Details
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$1,322.00
$847.99
As low as $27/mo
View Details
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000 at Elite Metal Tools
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$10,008.00
$6,386.00
As low as $207/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$13,095.00
$8,213.99
As low as $266/mo
View Details
Jet JCT-2612, 6" Rivet Buster 550612 at Elite Metal Tools
Jet JCT-2612, 6" Rivet Buster 550612
  • Ergonomic Drop Forged "D" Style handle
  • Heat treated steel barrel for increased durability
  • Heavy-Duty, industry proven valve design
  • Ideal for busting large rivets or concrete demolition
  • Positive retention of piston for increased user safety
$2,206.00
$1,590.99
As low as $51/mo
View Details
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$926.00
$590.58
As low as $19/mo
View Details
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000 at Elite Metal Tools
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$7,702.00
$4,915.00
As low as $159/mo
View Details
Jet SJ-25T, 25-Ton Screw Jack 441325 at Elite Metal Tools
Jet SJ-25T, 25-Ton Screw Jack 441325
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
$445.00
$296.99
View Details
Jet JCT-5670, 1/2" Industrial Air Drill 550670 at Elite Metal Tools
Jet JCT-5670, 1/2" Industrial Air Drill 550670
  • Auxiliary handle can be mounted on either side for increased operator control
  • Ergonomic "D" style handle with inside teasing trigger
  • External mounted Zerk® grease fittings feed lubricants to the industrial bearing design
  • Industrial gear train for high torque drilling applications
  • Backed by the industry leading 2-Year Warranty
$1,256.00
$861.99
As low as $28/mo
View Details
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171 at Elite Metal Tools
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
$930.00
$596.00
As low as $19/mo
View Details
Jet 10" x 16" Horizontal Bandsaw | J-7040 414478 at Elite Metal Tools
Jet 10" x 16" Horizontal Bandsaw | J-7040 414478
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
$8,553.84
$6,989.00
As low as $227/mo
View Details
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505 at Elite Metal Tools
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
$764.00
$511.00
As low as $16/mo
View Details
Jet JCT-1604, Floor Sand Rammer / Backfill Tamper 550604 at Elite Metal Tools
Jet JCT-1604, Floor Sand Rammer / Backfill Tamper 550604
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
$1,420.00
$972.99
As low as $31/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.