JET

  • 1/16" Increment height scale lets you make the most precise adjustments for fine cuts
  • Four high-speed steel cutter knives produce faster, smoother cutting
  • Large handwheel with positive gear drive allows for quick and accurately table adjustments
  • Magnetic controls provide long life and reliability
  • One-piece welded steel base offers solid support and stability
MSRP: $4,545.70
$3,699.99
As low as $120.24/mo

  • 4" Dust Port hooks up to dust management system and helps keep shop clean
  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
MSRP: $3,931.42
$3,199.99
As low as $103.99/mo

  • Adjustable depth stop for consistent repetitive cuts
  • Adjustable folding infeed/outfeed tables for leveling to bed and saves shop space when stored
  • Dual infeed speed control for 18fpm or 26fpm maximizes cut efficiency on different wood material types
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Maximum depth of cut 1/8", 6" depth and 13" width capacity
MSRP: $982.84
$849
As low as $27.59/mo

  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
  • Maximum depth of cut 1/8", 6" cutting height and 15" width capacity
MSRP: $2,948.56
$2,399.99
As low as $77.99/mo

  • Compatible with the JET JIW-45T Ironworker
  • Provides a second Punching station allowing increased output
  • Compatible with most Edwards Punch & Die Sets including round, square, oblong, hex, and metric.
MSRP: $1,545.30
$947
As low as $30.77/mo

  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $1,629.83
$1,375
As low as $44.68/mo

  • 24pc Set consists of:
  • 5pc Wiggler Set
  • 5pc 1/2" HSS Boring Bars
  • 1pc Drill Drift
  • 3pc Edge Finders

  • Cutterhead diameter: 3-7/32”
  • Table size: 25¾” x 20” 
  • Cutterhead speed: 5000 rpm 
  • Feed rate: 24 & 31 FPM
MSRP: $5,897.13
$4,799.99
As low as $155.99/mo

  • Compatible with JET 350017
  • Compatible with JET 350018
  • Compatible with JET 350020
  • Heavy-Duty Mill Drill stand
  • With locking height adjustment
MSRP: $609.29
$558
As low as $18.13/mo

  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$929
As low as $30.19/mo

  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components

  • Compatible with JET JIW-45T Ironworker
  • Ensure accurate, repeatable cuts on your Ironworker with this easily adjustable Material Stop Kit.
  • Shop the JET store for more Ironworker accessories and replacement parts
MSRP: $1,341.30
$841
As low as $27.33/mo

  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)

  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $751.43
$699
As low as $22.71/mo

  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths

  • Compatible with the JET JIW-45T Ironworker
  • Improve your precision and speed at your Punch workstation with adjustable fences and handles to align your material.
  • Shop the JET store for more Ironworker accessories and replacement parts
MSRP: $559.30
$404

  • Adds 6" height capacity
  • Includes all mounting hardware
  • Specially designed for each model
MSRP: $901.43
$789
As low as $25.64/mo

  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$931
As low as $30.25/mo

  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $626.43
$570
As low as $18.52/mo

  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,173.71
$965
As low as $31.36/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.