JET

Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$9,728.00

$6,199.99

As low as $201/mo

View Details

Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

$630.00

$441.00

View Details

Jet SLT-330F, Scissor Lift Table With Folding Handle 140771

All steel design of frame and table permit the transport of heavy materials
Easy-To-Use Hydraulic Foot Pump
Easy-to-use hydraulic foot pump for precision raising and lowering of table
Fixed rear wheels feature parking brakes for added safety
Fold-down handle for easy storage

$830.00

$546.00

As low as $17/mo

View Details

Jet PUC-37x25, Resin Utility Cart 140019

Compatible with Knaack Model CA-05 Cart Armour
Handle includes built-in storage bins for versatility
Industrial-duty, resin design that resists dents, chips, scratches and corrosion
Quiet, non-marking 5 inch casters for increased maneuverability
Rounded edges reduce damage to property and personnel

$342.00

$235.00

View Details

Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410

10' Power cord length to match an electric hoist with 10' lift
4-button controller for electric hoist and trolley with 4-pin quick-connect plug
Push button controller with cable strain relief system for durability and reliability
Compatible with VOLT Series Hoist and Trolley combinations
Backed by our industry leading 2-Year Warranty

$237.00

$169.00

View Details

Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$5,982.00

$3,752.18

As low as $121/mo

View Details

Jet JCT-1600, Benchtop Sand Rammer 550600

All Steel cylinder housing for increased durability
Fast powerful blows for compacting small, medium, and large sand molds
Front end seal protects the piston from excessive dirt and debris extending tool life
Heavy-Duty, industry proven valve design
Backed by the industry leading 2-Year Warranty

$817.00

$557.99

As low as $18/mo

View Details

Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$1,152.00

$737.99

As low as $23/mo

View Details

Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$8,998.00

$5,741.58

As low as $186/mo

View Details

Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$8,830.00

$5,629.38

As low as $182/mo

View Details

Jet JAT-801, Needle Scaler 505801

Ball lock retainer permits quick tool change
Heavy-duty, heat-treated barrels and pistons for reliability and durability
Backed by the industry leading 2-Year Warranty

$550.00

$399.00

View Details

Jet JCT-3622, 4" Stroke, Round Shank, 4-Bolt Chipping Hammer 550622

Comes with standard type retainer
Easy serviceability with the 4-bolt backhead
Ergonomic "D" style forged handle with outside trigger
Heat treated cylinder and piston for added durability
Heavy-Duty, industry proven valve design

$973.00

$664.99

As low as $21/mo

View Details

Jet JAT-480, 1/4", 1 HP Die Grinder 505480

360° Rotating air inlet keeps the air hose tangle free for added safety
Comes standard with 1/4" Erickson collet
Impact resistant composite housings reduce tool weight and user fatigue.
Sealed ball bearing design keeps out contaminants promoting smooth operation
Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments

$297.00

$204.99

View Details

Jet JG-300, 3 Ton Grip Puller Without Cable 286530

A double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

$1,072.00

$669.00

As low as $21/mo

View Details

Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202

Cast steel safety latches are secured with Allen screws and lock nuts
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging

$418.00

$274.38

View Details

Jet 3-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-300WO-30 207130

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$2,152.00

$1,372.99

As low as $44/mo

View Details

Jet 3" Stroke, Round Shank, 4-Bolt Chipping Hammer | JCT-3620A 550620

Comes with standard type retainer
Easy serviceability with the 4-bolt backhead
Ergonomic "D" style forged handle with outside trigger
Heat treated cylinder and piston for added durability
Heavy-Duty, industry proven valve design

$929.00

$632.99

As low as $20/mo

View Details

Jet JAT-467, 7" Industrial Angle Grinder 505467

1,000 Hour industrial motor system
Adjustable wheel safety guard to control spark direction
Front adjustable exhaust allows turning exhaust away from work and operator
Governed motor provides constant speed control so the tool does the work not you
Lightest tool in it's class

$1,338.00

$897.99

As low as $29/mo

View Details

Jet JAT-125, 3/8" Stubby Impact Wrench 505125

Easy touch teasing trigger for great control throughout the torque range
High impact resistant composite housing for lightweight durability
Jumbo hammer clutch that brings high torque in a small package with extreme durability
One hand side-to-side forward/reverse for easy one hand operation
Unmatched balance to reduce fatigue over long usage

$294.00

$196.99

View Details

Jet SLT-1650, Scissor Lift Table 140779

All steel design of frame and table permit the transport of heavy materials
Easy-To-Use Hydraulic Foot Pump
Easy-to-use hydraulic foot pump for precision raising and lowering of table
Fixed rear wheels feature parking brakes for added safety
Overload Protection ball valve prevents lifting loads past maximum capacity

$1,694.00

$1,080.00

As low as $35/mo

View Details

Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$7,585.00

$4,839.99

As low as $157/mo

View Details

Jet PUC_41x17, Resin Utility Cart 141012

Ergonomic Handle helps operator stand taller when pushing cart
5 inch quiet, non-marking casters
Handle includes built-in storage bins to hold smaller materials
550 pounds of carrying capacity
Backed by our industry leading 2-Year Warranty

$266.00

$185.00

View Details

Jet JCT-3623, 4" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550623

Comes with standard type retainer
Easy serviceability with the 4-bolt backhead
Ergonomic "D" style forged handle with outside trigger
Heat treated cylinder and piston for added durability
Heavy-Duty, industry proven valve design

$918.00

$625.99

As low as $20/mo

View Details

Jet SJ-15T, 15-Ton Screw Jack 441315

Complies with ANSI/ASME B30.1 standards
Corrugated Pivoting Head
Corrugated pivoting head, contours to the load providing maximum surface contact
Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
Improved design requires less effort to lift a maximum capacity load

$286.00

$194.00

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.