JET

  • 1/16" Increment height scale lets you make the most precise adjustments for fine cuts
  • Four high-speed steel cutter knives produce faster, smoother cutting
  • Large handwheel with positive gear drive allows for quick and accurately table adjustments
  • Magnetic controls provide long life and reliability
  • One-piece welded steel base offers solid support and stability
MSRP: $5,270.53
$4,289
As low as $139.39/mo

  • Built-in rabbeting ledge adds versatility
  • Center fence controls are conveniently mounted to allow quick adjustments
  • Exclusive front-mounted table adjustment handwheels make quick, easy, and accurate corrections
  • Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish
  • Heavy-duty cast iron infeed and outfeed tables with precision machined finish
MSRP: $2,000.12
$1,627
As low as $52.87/mo

  • 4" Dust Port hooks up to dust management system and helps keep shop clean
  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
MSRP: $4,594.80
$3,739
As low as $121.51/mo

  • Front mounted toggle switch with removable safety key
  • Highly visible scale for accurate depth of cut adjustments
  • Includes 4 mounting brackets that secure jointer to benchtop
  • Internal blower motor moves dust and chips away from motor and cutter head
  • Large dust collection bag with quick empty zipper
MSRP: $1,567.60
$1,345
As low as $43.71/mo

  • Built-in 4" dust chute connects to your collection system for efficient dust/chip disposal
  • Built-in rabbeting ledge adds versatility
  • Fence adjustment levers are conveniently located in the center of the fence for quick access
  • Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability
  • Magnetic controls provide long life and reliability, protecting the motor from potential electrical supply issues
MSRP: $3,013.66
$2,455
As low as $79.78/mo

  • Adjustable depth stop for consistent repetitive cuts
  • Adjustable folding infeed/outfeed tables for leveling to bed and saves shop space when stored
  • Dual infeed speed control for 18fpm or 26fpm maximizes cut efficiency on different wood material types
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Maximum depth of cut 1/8", 6" depth and 13" width capacity
MSRP: $1,148.72
$989
As low as $32.14/mo

  • Built-in dust chute with 4" port connects to your collection system for efficient dust/chip disposal
  • Center fence controls are conveniently mounted to allow quick adjustments
  • Exclusive front-mounted table adjustment handwheels make quick, easy, and accurate corrections
  • Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish
  • Heavy-duty cast iron infeed and outfeed tables with precision machined finish
MSRP: $2,702.80
$2,199
As low as $71.46/mo

On Sale
Jet 15" JET Straight Knife Planer, JWP-15B 722150 at Elite Metal Tools
  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
  • Maximum depth of cut 1/8", 6" cutting height and 15" width capacity
MSRP: $3,405.59
Was: $2,799
Now: $1,819.35
As low as $59.12/mo

  • Cutterhead diameter: 3-7/32”
  • Table size: 25¾” x 20” 
  • Cutterhead speed: 5000 rpm 
  • Feed rate: 24 & 31 FPM
MSRP: $7,027.45
$5,699
As low as $185.21/mo

  • Cutterhead diameter: 2-15/16”
  • Cutterhead speed: 5,500 rpm 
  • Cutting capacity width: 8”
  • Fence size: 40½” x 5”
MSRP: $3,783.99
$2,999
As low as $97.46/mo

  • 24pc Set consists of:
  • 5pc Wiggler Set
  • 5pc 1/2" HSS Boring Bars
  • 1pc Drill Drift
  • 3pc Edge Finders
MSRP: $560.77
$530
As low as $17.22/mo

  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $2,027.07
$1,681
As low as $54.63/mo

  • Compatible with JET 350017
  • Compatible with JET 350018
  • Compatible with JET 350020
  • Heavy-Duty Mill Drill stand
  • With locking height adjustment
MSRP: $770.32
$710
As low as $23.07/mo

  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,351.45
$1,162
As low as $37.76/mo

  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $1,040.59
$929
As low as $30.19/mo

  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $247.27
$236

  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
MSRP: $228.35
$215

  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
MSRP: $294.57
$280

  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,391.93
$1,192
As low as $38.74/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.