JET

Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$5,642.00

$3,596.00

As low as $116/mo

View Details

Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$5,868.00

$3,749.00

As low as $121/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$6,552.00

$4,110.20

As low as $133/mo

View Details

Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$7,028.00

$4,486.98

As low as $145/mo

View Details

Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901

JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
JET Carbide Turning Tool Set is packed in a custom wood case.
Stainless steel shaft will not rust
Carbide blades have a long cutting life

$233.99

$225.00

View Details

Jet JET — Infeed/Outfeed Tables for JET JWDS1632/1836 Sanders 723521

Extends table surface to 40"
Includes both tables and all needed hardware
Each table measures 18 x 10-1/4 in
Steel
Installation hardware included

$184.27

$179.00

View Details

Jet JET — Digital Readout for Drum Sander JWDS-2244/2550 723552

Mounting hardware included
Simple operation
For JWDS-2244, JWDS-2244OSC, and JWDS-2550 JET drum sanders

$245.70

$224.00

View Details

Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$6,408.00

$4,086.00

As low as $132/mo

View Details

Jet Closed Stand with Casters for JSG-6 6" x 48" / 12" Disc Sander - (708598) 708598

$563.90

$525.00

As low as $17/mo

View Details

Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$1,322.00

$847.99

As low as $27/mo

View Details

Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$10,008.00

$6,386.00

As low as $207/mo

View Details

Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$13,095.00

$8,213.99

As low as $266/mo

View Details

Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$926.00

$590.58

As low as $19/mo

View Details

Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$7,702.00

$4,915.00

As low as $159/mo

View Details

Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171

Lower material in a controlled decent with either hand or foot control for operator convenience
Overload Protection prevents lifting loads past maximum capacity
Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
Pump designed so that cylinder will not extend beyond maximum height
Pumps designed for any industrial environment

$930.00

$596.00

As low as $19/mo

View Details

Jet JET — Folding Infeed/Outfeed Tables for JWDS-2250/2244OSC 723551

Heavy duty tables fold for better storage
Tables are adjustable to level with precision
Tables assist with longer boards
Hold up to 35 lbs each
Steel

$307.13

$269.00

View Details

Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

$904.00

$590.58

As low as $19/mo

View Details

Jet JET — RF Remote Control for Dust Collector, 115V 708636C

Complete unit
Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
Works with all Dust Collection units 1-3/4 HP and smaller (115V ONLY)

$135.00

View Details

Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$6,634.00

$4,228.00

As low as $137/mo

View Details

Jet Bed Extension for Jet JWL-20EXT Lathe 719401

Fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS and JWL-1840DVR lathes
Includes tool rest riser
Mounts on the end of the bed to allow 60” between centers or down on the leg to add 18” to the diameter of the workpiece
Will not work on the JWL-1442VS or JWL-1642EVS

$405.00

View Details

Jet Open Stand for JSG-96 Sander - (708596) 708596

Compatible with Jet JSG-96 Sander
Shop the Jet store for all your replacement part needs

$263.15

$239.00

View Details

Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
TAA Approved
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available

$4,634.00

$2,650.99

As low as $86/mo

View Details

Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

$852.00

$555.90

As low as $18/mo

View Details

Jet JET Open Stand Only for 6" x 48" Belt and 12 " Disc Sander 708566

Compatible with JET 708599 Disc Sander
Shop the Jet Parts Store for all your replacement part needs

$319.41

$278.00

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.