JET

  • Layout
Jet GH-1660ZX, 3-1/8" Spindle Bore Geared Head Lathe 321940 at Elite Metal Tools
Jet GH-1660ZX, 3-1/8" Spindle Bore Geared Head Lathe 321940
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$34,252.86
$27,799.00
As low as $550/mo
View Details
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175 at Elite Metal Tools
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
$930.00
$596.00
As low as $19/mo
View Details
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121 at Elite Metal Tools
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121
  • Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
  • Workpiece Maximum Thickness (Aluminum, copper): 1/8”
  • Air Intake Connector: 1/4” NPT
  • Air Regulator: 3-position (3 speed ranges)
$3,023.50
$2,349.00
As low as $76/mo
View Details
Jet 6-Piece Premium R8 Collet Set CS-R8 650132 at Elite Metal Tools
Jet 6-Piece Premium R8 Collet Set CS-R8 650132
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
$162.00
View Details
JET 40” x 12 Gauge Box & Pan Brake with Foot Clamp BPF-1240 JT9-752125 at Elite Metal Tools
JET 40” x 12 Gauge Box & Pan Brake with Foot Clamp BPF-1240 JT9-752125
  • Finger Nose Angle: 42 deg.
  • Maximum Box Depth: 5"
  • Maximum Beam Lift: 1-7/8"
  • Finger Sizes: 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 3", 4", 6", 7-3/4", 10", 10-5/8"
$4,430.93
$3,649.00
As low as $118/mo
View Details
Jet GH-1640ZX, 3-1/8" Spindle Bore Geared Head Lathe 321930 at Elite Metal Tools
Jet GH-1640ZX, 3-1/8" Spindle Bore Geared Head Lathe 321930
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$32,517.14
$26,899.00
As low as $532/mo
View Details
Jet BG-379-1, 3" x 79" Belt Grinder 220V 1Ph 414610 at Elite Metal Tools
Jet BG-379-1, 3" x 79" Belt Grinder 220V 1Ph 414610
  • 3 extra 80 grit Silicon Carbide belts included
  • 3" Round connector and hose clamp for ease of mounting to a metalworking dust collection system
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
  • Fully assembled for immediate use
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
$2,705.49
$2,199.00
As low as $71/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe with Newall DP700 in Jet Metalworking, Turning, Lathes 323231 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe with Newall DP700 in Jet Metalworking, Turning, Lathes 323231
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
$17,886.99
$14,559.00
As low as $473/mo
View Details
Jet BG-379-3, 3" x 79" Belt Grinder 220V 3Ph 414615 at Elite Metal Tools
Jet BG-379-3, 3" x 79" Belt Grinder 220V 3Ph 414615
  • 3 extra 80 grit Silicon Carbide belts included
  • 3" Round connector and hose clamp for ease of mounting to a metalworking dust collection system
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
  • Fully assembled for immediate use
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
$2,705.49
$2,199.00
As low as $71/mo
View Details
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000 at Elite Metal Tools
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$7,656.00
$4,879.99
As low as $158/mo
View Details
Jet ESR-1650-3T, 50" x 16 Gauge Electric Slip Roll 3Ph 756028 at Elite Metal Tools
Jet ESR-1650-3T, 50" x 16 Gauge Electric Slip Roll 3Ph 756028
  • All electrical and rotating parts are designed for safety and ease of use
  • Cast iron frame
  • Convenient foot-control assembly with emergency-button
  • Easy to setup and operate
  • Forming roll has attached position scale for equal pressure adjustment
$6,155.21
$5,069.00
As low as $164/mo
View Details
Jet JET — Horizontal Roller Material Support Stand 414121 at Elite Metal Tools
Jet JET — Horizontal Roller Material Support Stand 414121
  • Heavy-duty cast iron and steel construction
  • Chrome plated ball bearing roller head
  • Locking screws provide added safety
  • Interchangeable roller heads
$198.57
$190.00
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$5,666.00
$3,618.00
As low as $117/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe & Acu-Rite 203 DRO in Jet Metalworking, Turning, Lathes 323230 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe & Acu-Rite 203 DRO in Jet Metalworking, Turning, Lathes 323230
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
$17,886.99
$14,559.00
As low as $473/mo
View Details
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115 at Elite Metal Tools
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115
  • 14 Gauge maximum capacity for aluminum and copper alloys
  • 16 Gauge maximum capacity for mild steel
  • 18 Gauge maximum capacity for stainless steel
  • All body sections are welded steel plate
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
$14,424.50
$11,879.00
As low as $386/mo
View Details
Jet GH-2280ZX, 3-1/8" Spindle Bore Geared Head Lathe 321980 at Elite Metal Tools
Jet GH-2280ZX, 3-1/8" Spindle Bore Geared Head Lathe 321980
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$40,742.86
$32,999.00
As low as $653/mo
View Details
Jet JVM-836-3 Mill With X-Axis Powerfeed 690174 at Elite Metal Tools
Jet JVM-836-3 Mill With X-Axis Powerfeed 690174
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
$12,678.57
$10,479.00
As low as $340/mo
View Details
Jet GH-1440-1 Lathe with DP700 DRO 323382 at Elite Metal Tools
Jet GH-1440-1 Lathe with DP700 DRO 323382
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,955.71
$19,699.00
As low as $389/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$18,688.57
$15,199.00
As low as $300/mo
View Details
JET 50” x 14 Gauge Box & Pan Brake with Foot Clamp BPF-1450 JT9-752127 at Elite Metal Tools
JET 50” x 14 Gauge Box & Pan Brake with Foot Clamp BPF-1450 JT9-752127
  • Finger Nose Angle: 42 deg.
  • Maximum Box Depth: 5"
  • Maximum Beam Lift: 1-7/8"
  • Finger Sizes: 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 3", 4", 6", 7-3/4", 10", 10-5/8"
$5,189.08
$4,109.00
As low as $133/mo
View Details
Jet PUC-44x25, Resin Flat Top Utility Cart 141017 at Elite Metal Tools
Jet PUC-44x25, Resin Flat Top Utility Cart 141017
  • 5 inch quiet, non-marking casters
  • 500 pounds of carrying capacity
  • Handle includes built-in storage bins to hold smaller materials
  • Quiet, Non-Marking Casters
  • Backed by our industry leading 2-Year Warranty
$397.00
$269.99
View Details
Jet BDB-1340A With CBS-1340A Stand 321102AK at Elite Metal Tools
Jet BDB-1340A With CBS-1340A Stand 321102AK
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$12,211.43
$9,979.00
As low as $324/mo
View Details
Jet HS1452-3T, 52" x 14 Gauge Hydraulic Shear 3 Ph 756206 at Elite Metal Tools
Jet HS1452-3T, 52" x 14 Gauge Hydraulic Shear 3 Ph 756206
  • 10 – 12 Gauge maximum capacity for soft alloys
  • 14 Gauge maximum capacity for mild steel
  • Easy-to-use satellite foot controls with emergency stop button
  • Hand-wheel controlled back gauge for quick and easy depth adjustments
  • Heavy-duty steel construction eliminates deflection across the blade span
$13,938.79
$11,479.00
As low as $373/mo
View Details
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777 at Elite Metal Tools
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
$1,066.00
$681.00
As low as $22/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.