Clausing Industrial

  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Depth scale and adjustable depth stop
  • Built-in low voltage electrical equipment in machine head
$17,325
As low as $342.86/mo

  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Built-in low voltage electrical equipment in machine head
  • Drill guard with microswitch
MSRP: $14,225
$13,495
As low as $438.58/mo

  • Tapping capacity in steel: up to 1.30" (33mm) maximum
  • Tapping capacity in cast iron: up to 1.54" (39mm) maximum
  • Machine base with 2 T-slots, coolant tank and pump
  • Built-in low voltage electrical equipment in machine head
MSRP: $16,100
$15,295
As low as $302.68/mo

  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
MSRP: $27,510
$26,795
As low as $530.27/mo

  • 3 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
MSRP: $37,795
$36,495
As low as $722.23/mo

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • CSA Electrics Standard
$33,735
As low as $667.61/mo

  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Feed crank wheel for manual feed
  • Depth scale and adjustable depth stop
$12,535
As low as $407.38/mo

  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
MSRP: $30,185
$29,495
As low as $583.70/mo

  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 3 head drill press
MSRP: $44,185
$42,995
As low as $850.87/mo

  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Single head drill press
$16,495
As low as $326.43/mo

  • Powerful 2 Hp spindle drive motor for heavy-duty cutting
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
  • Coolant system
  • Low volt and overload protection
$18,325
As low as $362.65/mo

  • Tapping capacity in steel: up to .87" (30mm) maximum
  • Tapping capacity in cast iron: up to 1.18" (30mm) maximum
  • Large worktable with 3 T-slots,
  • Emergency STOP
MSRP: $15,380
$14,460
As low as $469.95/mo

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
$42,825
As low as $847.50/mo

  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • High/low speed range selector
$10,885
As low as $353.76/mo

  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Machine base with 2 T-slots, coolant tank and pump
  • Drill guard with microswitch
$15,625
As low as $309.21/mo

  • Powerful 3 HP spindle drive motor for heavy duty cutting
  • High speed gears
  • Low volt and overload protection
  • Tool kit & manuals
$23,995
As low as $474.86/mo

  • 2HP spindle drive motor for heavy duty cutting
  • High speed gears are made of nickel-chrome steel and are heat treated and ground for durability
  • Coolant system
  • Low volt & overload protection
$17,075
As low as $337.91/mo

  • High speed gears are made of Nickel-Chrome Steel and are heat-treated and ground for durability
  • Extra auxiliary dial for spindle feed depth indication, allows review of spindle feed depth, .0394" to 7.874"
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
    Coolant system
  • CSA Electrics Standard
$17,785
As low as $351.96/mo

  • 5 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
MSRP: $60,685
$57,995
As low as $1,147.72/mo

  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 6 head drill press
$84,495
As low as $1,672.15/mo

  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
$80,650
As low as $1,596.06/mo

  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • High/low speed range selector
$10,200
As low as $331.50/mo

  • “RS" models are equipped with automatic feed reversing TL25 system for tapping
  • Spindle reversing switch
  • High/low speed range selector
  • Drill guard with microswitch
$12,570
As low as $408.52/mo

  • High-quality cast-iron arm with heat-treated and ground slides for smooth and accurate head positioning
  • The bearing bracket for gear-box is fitted with standard bearings to fit arm slide for smooth gear-box operation
  • Equipped withhydraulic clamping. With a push of a button you can have arm unclamped then move vertically, or stop then clamp automatically
  • CSA Electrics Standard
$31,095
As low as $615.37/mo

First founded in 1911 this industrial company has become an industry leader in the metalworking machine field. They are located in Kalamazoo, Mi. They sell products such as lathes, drill press, metal cutting band saws, and  mills. Clausing Industrial makes high quality and efficient machinery.

If you are interested in metalworking machinery or anything else Clausing Industrial has to offer, please contact us. Here at Elite Metal Tools we offer high quality customer service and low prices.