Clausing Industrial

  • Band Wheel Diameter: 15” Flanged, Cast Iron
  • Blade Size: 1” x .035” x 11’
  • Bed Height: 25”
  • Blade Speeds Step: (4) 75, 121, 190, 305 fpm
  • Band Wheel Diameter: 15.4” Flanged, Cast Iron
  • Blade Size: 1” x 0.035” x 11’-4.5”
  • Bed Height: 21.8”
  • Blade Speeds: 69–321 fpm
  • Hydraulic Pump Motor: 2 Hp
  • Hydraulic Oil Capacity: 10.5 gallons
  • Blade Speeds (Variable Speed): 66-328 fpm
  • Blade Size (W x T x L): 2” x 0.06” x 283”
  • Band Wheel Diameter: 15” Flanged, Cast Iron
  • Blade Size: 1” x .035” x 11’
  • Bed Height: 25”
  • Blade Speeds VS: 50-295 fpm
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • 3/4" (19mm) Carbon Hardback Blade
  • Two (2) year limited warranty
  • Blade Speeds (Variable Speed): 66–330 fpm
  • Blade Size: 1.25” x 0.042” x 193”
  • Minimum Cut Thickness: 0.126”
  • Max. Feed: 255.9”
  • Blade Speeds (Variable Speed): 49-295 fpm
  • Blade Size (W x T x L): 2” x 0.063” x 326.8”
  • Blade Tension: Hydraulic
  • Coolant: Recirculating
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • 1/2" (13mm) and 3/4" (19mm) Chevron type Blade Guides with Back-Up Roller
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Two (2) year limited warranty
  • 5 Hp TEFC Motor, with Brake (full stop from max. speed within 10 seconds)
  • 1" (25.4mm) Chevron type Blade Guides with Back-Up Roller
  • Blade Speed Indicator
  • Two (2) Year Limited Warranty
  • Twin column design insures rigid support during cutting cycle by keeping the blade parallel and square to the work piece
  • Two additional guides to support the blade from the top
  • Cast iron vises with replaceable hardened wear plates
  • Two (2) year limited warranty
  • Blade Speeds (Variable Speed): 83–330 fpm
  • Blade Size: 1.5” x 0.050” x 257.5”
  • Blade Tension: Hydraulic
  • Coolant: Recirculating
  • Twin column design insures rigid support during cutting cycle by keeping the blade parallel and square to the work piece
  • Automatic hydraulic blade tensioning
  • Integral coolant system
  • Two (2) year limited warranty
  • 5 Hp TEFC Motor, with Brake (full stop from max. speed within 10 seconds)
  • Auxiliary Table 19" (483mm)W x 26-3/4" (679mm)L
  • Blade Tension Indicator
  • Two (2) Year Limited Warranty
  • Automatic kerf loss compensation & computer controlled multiple indexing
  • Smart NC-100 technology programmable up to 100 different jobs
  • Automatic height setting feature
  • Two (2) year limited warranty
  • Carbide blade guides with roller bearings
  • Precision feed pressure & feed rate
  • Infinitely variable blade speed
  • Two (2) year limited warranty
  • Smart NC-100 technology programmable up to 100 different jobs
  • Precision feed pressure & feed rate
  • Cast iron vises with replaceable hardened wear plates
  • Two (2) year limited warranty
  • Cross link connecting two columns for enhanced structural strength
  • Automatic hydraulic blade tensioning device
  • Hydraulically powered in-feed lift roller for forward and backward feeding
  • Two (2) year limited warranty
  • The extra heavy-duty saw frame is supported by two large bore hydraulic cylinders, providing unsurpassed rigidity, and the smoothest cutting possible
  • Dual Column design with precision ground columns ensures smooth saw frame movement and consistent cutting force throughout the cutting cycle
  • Three sets of vises design. The front and middle vises hold the stock during cutting while the guide vise can be separately controlled to guide the material during feeding cycle
  • Two (2) year limited warranty
  • The extra heavy-duty saw frame is supported by two large bore hydraulic cylinders, providing unsurpassed rigidity, and the smoothest cutting possible
  • Hydraulic controlled tungsten carbide blade guide
  • Heavy-duty machine structure design for heavy cutting jobs
  • Two (2) year limited warranty
  • The extra heavy-duty saw frame is supported by two large bore hydraulic cylinders, providing unsurpassed rigidity, and the smoothest cutting possible
  • Hydraulic Blade Tension System, with easy to read pressure gauge
  • Precision Feed Pressure control valve with micro-precision adjustment
  • Two (2) year limited warranty

First founded in 1911 this industrial company has become an industry leader in the metalworking machine field. They are located in Kalamazoo, Mi. They sell products such as lathes, drill press, metal cutting band saws, and  mills. Clausing Industrial makes high quality and efficient machinery.

If you are interested in metalworking machinery or anything else Clausing Industrial has to offer, please contact us. Here at Elite Metal Tools we offer high quality customer service and low prices.