Cantek

  • Layout
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14 at Elite Metal Tools
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14
  • Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
  • Cycle Speed: 95 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size: 14″
$7,035
As low as $228.63/mo
View Details
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P at Elite Metal Tools
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P
  • Panel thickness: 0.315”~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Working table height: 38” (960 mm)
  • Power: 10.9 HP 230V Three Phase
$40,215
As low as $795.85/mo
View Details
Cantek Single Phase Standard Automatic Edgebander MX340M at Elite Metal Tools
Cantek Single Phase Standard Automatic Edgebander MX340M
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Single Phase
$18,585
As low as $367.79/mo
View Details
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M at Elite Metal Tools
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$24,675
As low as $488.31/mo
View Details
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508 at Elite Metal Tools
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508
  • Cutting Angles: +60° ~ 0° ~-60°
  • Cycle Speed: 30-45 cuts/min
  • Saw Blade Size: 20″
  • Saw Arbor Diameter: 1″
$18,690
As low as $369.87/mo
View Details
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340 at Elite Metal Tools
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$24,045
As low as $475.85/mo
View Details
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$15,120
As low as $299.22/mo
View Details
Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371
  • Main Motor: 10 HP
  • Working Width: 37″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5″
$19,740
As low as $390.65/mo
View Details
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$7,665
As low as $249.11/mo
View Details
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431 at Elite Metal Tools
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$27,825
As low as $550.65/mo
View Details
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36 at Elite Metal Tools
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36
  • Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 36”
$28,140
As low as $556.89/mo
View Details
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$14,490
As low as $470.92/mo
View Details
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$21,000
As low as $415.59/mo
View Details
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$21,840
As low as $432.21/mo
View Details
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH) at Elite Metal Tools
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH)
  • Panel Thickness: 0.472 -1.77”
  • Edge Thickness: 0.0158”-0.118”
  • Feeding Speed: 23 FPM (7 m/min.)
  • Feed Motor: 1 HP
$29,610
As low as $585.98/mo
View Details
Cantek 10HP 24” Miter Cut-Off Saw PCM610 at Elite Metal Tools
Cantek 10HP 24” Miter Cut-Off Saw PCM610
  • Cutting Angles: +60° ~ 0° ~ -60°
  • Cycle Speed: 35-40 cuts/min
  • Saw Blade Size: 24″
  • Saw Arbor Diameter: 1″
$29,505
As low as $583.90/mo
View Details
Cantek 230V Three Phase 29FPM Automatic Pre-Milling Compact Edgebander with Quick-Change Glue Pot MX350 at Elite Metal Tools
Cantek 230V Three Phase 29FPM Automatic Pre-Milling Compact Edgebander with Quick-Change Glue Pot MX350
  • Panel thickness: 0.315” - 1.77”
  • Max pre-milling thickness: 1.77”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 3 = 1800 CFM 
$33,285
As low as $658.71/mo
View Details
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30 at Elite Metal Tools
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30
  • Cutting Capacity (Thickness x Width): 2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 30”
$19,740
As low as $390.65/mo
View Details
Cantek 230V Three Phase 25” Wide Belt Sander C251 at Elite Metal Tools
Cantek 230V Three Phase 25” Wide Belt Sander C251
  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Infeed table: 11-1/2”
$12,390
As low as $402.67/mo
View Details
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372 at Elite Metal Tools
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372
  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$30,450
As low as $602.60/mo
View Details
Cantek 10HP 460V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 460V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$7,980
As low as $259.35/mo
View Details
Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251 at Elite Metal Tools
Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251
  • Abrasive Belt Size: 25” x 60”
  • Working Width: 25″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5″
$14,490
As low as $470.92/mo
View Details
Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA at Elite Metal Tools
Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA
  • 1st Main Motor: 20 HP
  • Working Width: 36″
  • Minimum Part Length: 16.9″
  • Maximum Thickness Opening: 4.7″
$45,465
As low as $899.75/mo
View Details
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA at Elite Metal Tools
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA
  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$49,560
As low as $980.79/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.