Cantek

  • Layout
Cantek 16” Single Head Horizontal Band Resaw HR400PB at Elite Metal Tools
Cantek 16” Single Head Horizontal Band Resaw HR400PB
  • Max. working capacity (W x H): 15 3/4″ x 9.8″     
  • Saw wheel diameter: 28″             
  • Feed speed: variable: 13~90 FPM             
  • Conveyor belt size: 15.16″ x 215.4″              
$32,340
As low as $640.00/mo
View Details
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14 at Elite Metal Tools
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14
  • Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
  • Cycle Speed: 95 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size: 14″
$7,035
As low as $228.63/mo
View Details
Cantek 12” x 166” Oscillating Edge Sander OES-512D at Elite Metal Tools
Cantek 12” x 166” Oscillating Edge Sander OES-512D
  • Sanding motor: 10 HP
  • Sanding belt size: 12” x 166”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$12,075
As low as $392.43/mo
View Details
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S at Elite Metal Tools
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S
  • Max. working width: 11″
  • Max. working height: 4″
  • Feed speed (Variable): 6.5 ~ 27 FPM
  • Speed of sanding wheel: 200 ~ 1200 RPM            
$18,690
As low as $369.87/mo
View Details
Cantek 20 HP Single Head Economical Horizontal Resaw HR12E at Elite Metal Tools
Cantek 20 HP Single Head Economical Horizontal Resaw HR12E
  • Max. Input Board Size: 11.8” (Wide) x 9.8” (Thick) (300 x 250mm)
  • Conveyor belt size: 11.2” x 215.3” (285 x 5470mm)
  • Diameter of saw wheel: 28” Dia. x 1” Wide
  • Main Motor: 20 HP
$15,225
As low as $301.30/mo
View Details
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508 at Elite Metal Tools
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508
  • Cutting Angles: +60° ~ 0° ~-60°
  • Cycle Speed: 30-45 cuts/min
  • Saw Blade Size: 20″
  • Saw Arbor Diameter: 1″
$18,690
As low as $369.87/mo
View Details
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$15,120
As low as $299.22/mo
View Details
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371
  • Main Motor: 10 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$19,740
As low as $390.65/mo
View Details
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$7,665
As low as $249.11/mo
View Details
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431 at Elite Metal Tools
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$27,825
As low as $550.65/mo
View Details
Cantek 9” x 138” Oscillating Edge Sander PW-120E at Elite Metal Tools
Cantek 9” x 138” Oscillating Edge Sander PW-120E
  • Working Capacity (LxH) 47” x 8”
  • Belt Size (LxH) 138 ½” x 9”
  • Sanding Belt Speed 1080 m/min (3544 FPM)
  • Motor 3HP: 230-volt 3 phase
$8,190
As low as $266.17/mo
View Details
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36 at Elite Metal Tools
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36
  • Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 36”
$28,140
As low as $556.89/mo
View Details
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$14,490
As low as $470.92/mo
View Details
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$21,840
As low as $432.21/mo
View Details
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$21,000
As low as $415.59/mo
View Details
Cantek 11” Hydraulic Single Head Horizontal Band Resaw HR11-P at Elite Metal Tools
Cantek 11” Hydraulic Single Head Horizontal Band Resaw HR11-P
  • Max. Input Board size: 11.8” (Wide) x 9.8” (Thick)
  • Conveyor belt size: 11.2” x 215.3”
  • Main Motor: 20 HP – Voltage 230/3/60
  • Max. infeed speed: 52.5 FPM (16 M/min)
$20,265
As low as $401.04/mo
View Details
Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A at Elite Metal Tools
Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A
  • Saw Wheel Diameter: 37″
  • Table size: 45-1/4” x 31-1/2″
  • Throat Capacity: 36-1/2″
  • Motor: 10 HP
$15,225
As low as $301.30/mo
View Details
Cantek 10HP 24” Miter Cut-Off Saw PCM610 at Elite Metal Tools
Cantek 10HP 24” Miter Cut-Off Saw PCM610
  • Cutting Angles: +60° ~ 0° ~ -60°
  • Cycle Speed: 35-40 cuts/min
  • Saw Blade Size: 24″
  • Saw Arbor Diameter: 1″
$29,505
As low as $583.90/mo
View Details
Cantek 20” Bandsaw 3 HP Three Phase Motor HB-500R at Elite Metal Tools
Cantek 20” Bandsaw 3 HP Three Phase Motor HB-500R
  • Saw wheel diameter: 20″
  • Motor: 3HP
  • Table Size: 26-3/4″ x 20-1/2″
  • Throat Capacity: 18-3/4″
$4,999
As low as $162.46/mo
View Details
Cantek 10HP 460V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 460V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$7,980
As low as $259.35/mo
View Details
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30 at Elite Metal Tools
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30
  • Cutting Capacity (Thickness x Width): 2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 30”
$19,740
As low as $390.65/mo
View Details
Cantek 230V Three Phase 25” Wide Belt Sander C251 at Elite Metal Tools
Cantek 230V Three Phase 25” Wide Belt Sander C251
  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Minimum part length: 13”
$12,390
As low as $402.67/mo
View Details
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372 at Elite Metal Tools
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372
  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$30,450
As low as $602.60/mo
View Details
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA at Elite Metal Tools
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA
  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$49,560
As low as $980.79/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.