Baileigh Industrial

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 5/8"-3" Notching Capacity (OD)
• Infinite Angle Adjustment 
• 1/2" (12.7mm) Hand Drill 
• 24"x12"x12" Dimensions

• 12-14" Blade
• 3000 - 5000 RPM
• 15' x 125" sliding table
• 220V, 3PH

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• 1HP Motor 
• 177RPM Mill Speed
• 110Volt 
• 0-60º Angle Adjustment

• 5 HP
• 3600 RPM
• 1" Table Harbor
• 220V 1 PH

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• 1"-2.5" Notching Capacity (OD)
• Infinite Angle Adjustment 
• 1/2" (12.7mm) Hand Drill (Power) 
• 24"x12"x12" Dimensions 

• Air Operated 90-115 PSI
• Max. Capacity 11ga.
• 50 Strokes Per Minute
•  5" Blade Length 

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000

• 2 HP Motor
• 110/220V 1PH
• Table Size 20"
• 10" Blade

• Notching Capacity Pipe: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2",2"
• Power: 220V / 1-phase

• Designed to notch schedule 40 pipe ranging from 0.25” to 2” in size
• Makes perfect 90° notches in seconds

• 1-1/2", 2" Notching Capacity (Pipe)
• Manual 
• 36lbs
• 20"x7"x7" Dimensions 

• 3HP Motor 
• 50 Strokes Per Minute 
• 9ga. Max. Capacity Mild Steel 
• 220V/3-Phase 

• 4HP Motor 
• 15 Strokes Per Minute 
• Max. Capacity .237" 
• 30º-140º Variable Notch Angle 

• Notching Capacity (OD) .75" - 3"
• Angle Adjustment 0 – 60°
• Belt Size 6" x 79"
• Belt Speed 5400 (fpm)

• Blade Length 8"
• Max. Capacity Mild Steel 9ga. 
• 4HP Motor 
• 15 Strokes Per Minute 

• 3PH Motor 
• 4"x79" Belt Size 
• 5420FPM Belt Speed
• .75"-2" Notching Capacity (OD)

• 16 Gauge Mild Steel Capacity 
• Manually Operated 
• 6"x6" at 90º
• 3/4" Stroke 

• Speed Control: Inverter
• Speed Range: 40 to 230 rpm
• Shank Hole: 1.25”
• Angle Adjustment: 0 – 60°

• 3/4", 1", 1-1/4" Notching Capacity (Pipe)
• Manual 
• 20lbs 
• 20"x7"x7" Dimensions