Baileigh Industrial

• 18" Round Capacity 
• Dual Mitering Swivel Head Design 
• Hydraulic Vise & Bow 
• 220V/3 Phase 

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• Over 78" of bendable area
• Uses a heavy duty magnet to clamp the material between itself and the bending "clamp bar"
• 6 Ton of power is constant across the entire beam
• 220V / 1-Phase

• Thickness (SS): 16 ga. (20 ga.)
• Box Depth: 2.5"
• Bend Angle: 0 – 135°
• Finger Sizes: 17 Total, 2 x 1-1/2”, 4 x 2”, 5 x 3”, 6 x 6”

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• 48" x 16-gauge mild steel capacity 
• Includes floor stand 
• Stop rod 

• 24" x 16"-gauge mild steel capacity
• Includes floor stand
• Stop rod and counterweight assist
• 5-finger assortment

• Maximum Thickness 12.375"
• Throat Depth 20.50"
• Blade Length 153"
• Blade Speed 65 - 1640 fpm

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Hydraulic and Manual Descent
• Inverter Driven Variable-Speed
• 9" Round Capacity
• Dual Mitre Head Up To 60º

• Maximum Thickness: 12.2"
• Speed Control: Inverter
• Table Size: 24" x 24"(cast) & 7.8" x 24"(steel)
• Welder Capacity: 0.74"

• Thickness (SS): 14 ga. (18 ga.)
• Stand: Yes
• Box Depth: 4"
• Bend Angle: 0 – 135°

• 72" x 10-gauge mild steel capacity 
• Box, pan, and straight 
• 17-finger assortment 
• Programmable bend angle 

• 120" x 16-gauge mild steel capacity 
• Includes floor stand 
• Stop rod and counterweight assist 

• Thickness (SS): 16 ga. (20 ga.)
• Clamping Force: 6 ton
• Bend Angle: 0 - 180°
• Max. Clamping Bar Lift: Unlimited

• Adjustbale counterweight apron assist
• Adjustable beam
• 6" box depth
• 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 9 - 6"

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Dual Mitering 45ºL And 60ºR
• Round Capacity 13"
• Digital Readout For Blade Speed
• Inverter Driven

• Adjustable counterweight apron assist
• Adjustable beam
• 6" box depth
• 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 11 - 6"

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Butt-Welder Capacity (Blade Width): 0.125” – 0.625”
• Maximum Thickness: 12.9"
• Throat Depth: 18"
• Blade Length: Range 146.45" - 147"

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel 

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp