Baileigh Industrial

• 48" x 10-gauge mild steel capacity 
• Box, pan, and straight 
• 11-finger assortment 
• Programmable bend angle 

• 120" x 14-gauge mild steel capacity 
• Includes floor stand 
• Stop rod and counterweight assist 

• 2 Axis NC Back Gauge
• Hydraulically Driven Bend Plate
• Easy Degree Adjustment Auto-stop
• Semi-Automatic bending mode with foot pedal control for increased productivity.

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• 96" x 12-gauge mild steel capacity 
• Includes floor stand 
• Stop rod and counterweight assist 

• Allows for the operator to clamp the material with their foot, to keep hands free
• Built from the best possible components
• Easy to adjust gap adjustment
• Spring loaded cylinder assists lifting the apron which gives assistance operator when bending at full capacity

• 80" x 24" Table Size
• Dual Motor
• 1950 CFM Per Motor
• 220V / 1 Phase

• Over 78" of bendable area
• Uses a heavy duty magnet to clamp the material between itself and the bending "clamp bar"
• 6 Ton of power is constant across the entire beam
• 220V / 1-Phase

• Thickness (SS): 16 ga. (20 ga.)
• Box Depth: 2.5"
• Bend Angle: 0 – 135°
• Finger Sizes: 17 Total, 2 x 1-1/2”, 4 x 2”, 5 x 3”, 6 x 6”

• 48" x 16-gauge mild steel capacity 
• Includes floor stand 
• Stop rod 

• 2340 CFM
• HEPA Filter Standard
• Tool-Less Filter Maintenance
• CSA - U.S. Certified

• 24" x 16"-gauge mild steel capacity
• Includes floor stand
• Stop rod and counterweight assist
• 5-finger assortment

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Thickness (SS): 14 ga. (18 ga.)
• Stand: Yes
• Box Depth: 4"
• Bend Angle: 0 – 135°

• 72" x 10-gauge mild steel capacity 
• Box, pan, and straight 
• 17-finger assortment 
• Programmable bend angle 

• 120" x 16-gauge mild steel capacity 
• Includes floor stand 
• Stop rod and counterweight assist 

• Thickness (SS): 16 ga. (20 ga.)
• Clamping Force: 6 ton
• Bend Angle: 0 - 180°
• Max. Clamping Bar Lift: Unlimited

• Adjustbale counterweight apron assist
• Adjustable beam
• 6" box depth
• 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 9 - 6"

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Adjustable counterweight apron assist
• Adjustable beam
• 6" box depth
• 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 11 - 6"

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

• 4HP Motor 
• 6691 fpm Belt Speed
• Pneumatic / Manual Power 
• Contact Wheel DiaxWidth 7.87"x3"

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Filter Type Three Stage (Aluminum mesh - Polyester Teflon Coated Cartridge with Pulse Clean - HEPA filter)
• Number of Filters 3
• Filter Size Aluminum mesh(21.25" x 17.25" x 7/8") - Polyester Teflon Coated Cartridge with Pulse Clean(Ø11.2" x 13" L) - HEPA filter(18" x 20" x 5.9")
• Power 110V