Baileigh Industrial

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• 48" x 16-gauge mild steel capacity 
• Includes floor stand 
• Stop rod 

• 24" x 16"-gauge mild steel capacity
• Includes floor stand
• Stop rod and counterweight assist
• 5-finger assortment

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Thickness (SS): 14 ga. (18 ga.)
• Stand: Yes
• Box Depth: 4"
• Bend Angle: 0 – 135°

• 72" x 10-gauge mild steel capacity 
• Box, pan, and straight 
• 17-finger assortment 
• Programmable bend angle 

• 120" x 16-gauge mild steel capacity 
• Includes floor stand 
• Stop rod and counterweight assist 

• Thickness (SS): 16 ga. (20 ga.)
• Clamping Force: 6 ton
• Bend Angle: 0 - 180°
• Max. Clamping Bar Lift: Unlimited

• Adjustbale counterweight apron assist
• Adjustable beam
• 6" box depth
• 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 9 - 6"

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Adjustable counterweight apron assist
• Adjustable beam
• 6" box depth
• 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 11 - 6"

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel 

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp

• 1/8HP Coolant Motor 
• 1.5" Drill Capacity 
• 85-4000rpm Spindle Speed
• Tapping Capacity 3/4" 

• Spindle Travel: 5.9"
• Quill Diameter: 2.44”
• Tapping Capacity: 5/8"
• Drill Capacity: 1.25"

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• Bend angle indicator and stop rod for repeatability
• Adjustable counterweights for apron lift assist
• Adjustable beam for varying sheet thickness
• 2-piece hardened finger assortment: 6 - 3", 4 - 4", 10 - 5", 6 - 6"

• Cuts Non-ferrous metals - Blade turns at 3200 rpm
• 41/4" Capacity
• Miters left and right
• 220V, 3PH

• Spindle Speeds: 5
• Spindle Taper: B16
• Rpm: 250, 700, 1150, 1900, & 2900
• Drill Capacity Steel: 5/8"

• Thickness (SS): 14 ga. (18 ga.)
• Box Depth: 2.5"
• Bend Angle: 0 – 135°
• Power: Manual

• Bending Capacity Max Length Thickness: 78.75" / 0.196"
• Stroke Distance: 5.9"
• Table Width: 6.29"
• Return Speed: 2.36" / sec

• 11" Blade
• Semi-Automatic operation - manual feed also available
• Self centering vice
• 2.75" Tube Capacity