Baileigh Industrial

• 220V Single Phase
• 3 Horse Power
• 2 Outlets
• 4" Dust Collection Port

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Table Size (Width) 12"
• RPM 5500
• Fence Size 5.5" x 60"
• Maximum Rabbeting Capacity 3/4"

• Mild Steel Capacity 16 ga.
• Throat Depth 7"
• Working Height 37.5"
• Stand Included

• 110V
• 0.75 Horse Power
• 11.8 Max Stock Width
• 45 Degree Table Tilt

• Maximum Capacity: 7 ton
• Mild Steel Capacity: 16 ga.
• Aluminum Capacity: 14 ga.
• Throat Depth: 48"

• Throat Depth 36"
• Capacity (Mild Steel) 16 ga.
• Aluminum Capacity 14 ga.
• Power 110V

• Mild Steel Capacity: 16 ga.
• Aluminum Capacity: 14 ga.
• Tooling Height Adjustment: 11"
• Throat Depth: 24" adjustable

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Speeds 2625 fpm
• Belt/Blade Size 37" x 75"
• Max Stock Width 36.5"
• Maximum Stock Height 6"

• 3000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

• Table Saw RPM: 4200
• Cut Capacity at 45° Miter (In.): 12 x 1-9/16 (L), 12 x 1 (R)
• Cut Capacity at 90° (In.): 0°, 33.9°, and 45° (L/R)
• Miter Capacity (Deg.): 52° L, 60° R

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Maximum Depth of Cut (Resaw): 2"
• AMP Draw: 15
• Throat Capacity (IN): 22.375"
• Pieces Included: Material hold down, Onboard Dust Blower, Foot Pedal Operation Switch

• 600 CFM
• 110V
• 1.5 Hp
• 6"x4" Dust Collection Port

• Speeds 2625 fpm
• Belt/Blade Size 25" x 75"
• Max Stock Width 24"
• Maximum Stock Height 6"

• Operater Controls Beats Per Minute From 0 - 1700
• It has the ability to shrink, stretch, dome, edge turn, bead, and offset
• 19" Deep Throat
• Quick Release Bottom Tooling Holder

• Perfect Addition To Any Shop
• Bending Slide Of The LB-8 is Fully Supported By Sealed Ball Bearings
• Typically In Stock
• Open Jaw Design

• Mild Steel Capacity: 14 ga.
• Aluminum Capacity: 10 ga.
• Tooling Height Adjustment: 2"
• Throat Depth: 28"

• Throat Depth 36"
• Capacity (Mild Steel) 16 ga.
• Aluminum Capacity 14 ga.
• Power 110V

• Swing 15"
• Spindle MT2
• Drill Capacity 0.7"
• Spindle Travel 3.1"

• Quick Release Handle Raises Top Ram
• Quick Change Tooling
• Fully Adjustable Lower Tool Post
• Variable Speed Option

• Motor Hp 1/8 hp
• Max. Thickness (Mild Steel) 16 gauge
• Roll Holder Included
• Throat Depth 24"

• Mild Steel Capacity: 18 ga
• Throat Depth: 2.5"
• Aluminum Capacity: 16 ga.
• Power: Manual