Baileigh Industrial

  • 60" x 14-Gauge Mild Steel Capacity
  • Back and Side Gauges
  • Hydraulic Operation
  • 220V, 3-Phase
$16,901.64
$13,919.00
  • 1.5HP Motor 
  • 5/8" Tapping Capacity 
  • 1" Drill Capacity 
  • 5.3" Spindle Travel 
$5,772.86
$4,699.00
  • Rolling Capacity: 20 ga. (0.036”)
  • Shear Capacity: 20 ga. (0.036”)
  • Min. Rolling Dia.: 1.70”
  • Bending Capacity: 20 ga. (0.036”)
$2,791.64
$2,299.00
  • Rolling Capacity: 20 ga. (0.036”)
  • Shear Capacity: 20 ga. (0.036”)
  • Bending Capacity: 20 ga. (0.036”)
  • Finger Lengths: 1", 2-1/8", 3-1/8", 6", 8", 10-1/8"
$1,759.50
$1,449.00
  • Driven Rolls 2
  • Roll Adjustment Manual
  • Pipe Capacity Size: .5” (sch.40) / Min. Dia.: 14”
  • Round Tube Capacity Size: 1" (.0625") Min. Dia.: 16"
$6,070.21
$4,999.00
  • Spindle Speed 150-3000rpm
  • Spindle Travel 5.3" 
  • Drill Capacity Steel 1" 
  • Quill Diameter 2.44" 
$5,642.74
$4,649.00
  • Built For Years and Years of Production
  • 7.5 HP Motor
  • Jog, Single or Continuous Cutting Modes
  • Side Gauges
$36,233.07
$29,839.00
  • Hydraulic Adjustments 
  • Vertical And Horizontal Bender 
  • Foot Pedal Controlled 
  • Digital Readout 
$24,284.50
$19,999.00
  • Manual Adjustment Of Top Roll 
  • Portable 
  • Includes 1-1/2" OD Tooling 
  • Excellent For Ornamental Application, Not Intended For Circles
$1,028.42
$879.00
  • Includes Tooling For Flat Bar
  • 3 Driven Rolls Manually Powered
  • Includes Heavy Duty Stand
  • Perfect For Doing Small Circles
  • Three Driven Rolls 
  • Foot Pedal Controlled 
  • Hdraulic Drive 
  • Vertical And Horizontal Bending 
$77,373.07
$63,719.00
  • 10 Gauge Mild Steel Capacity
  • 13 Powerful Hold Downs Clamps
  • Multiple Cutting Edges Allowing for Longer Blade Life
  • Can Be Operated In Jog, Single-Cycle, or Continuous Cycle Mode
$49,592.32
$40,839.00
  • 52" x 1/4"-Mild Steel Capacity
  • Front and Back Gauges
  • Fast Blade Gap Adjustment
  • 220 / 3-Phase
$46,335.93
$38,159.00
  • Table Size: 63" x 39"
  • Max. Table Height: 39"
  • Travel Speed: 25 sec. for Max. Height
  • Capacity: 4,400 lbs.
$8,218.00
$4,839.00
  • 2.95" Quill Diameter 
  • Spindle Speed 85-2000rpm 
  • 2HP Motor 
  • 1.5" Drill Capacity 
$6,855.71
$5,649.00
  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4” swing to tackle large pieces of material
  • Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity
$14,741.43
$11,999.00
  • 70" x 1/4" Mild Steel Capacity
  • Front Material Gauges
  • Fast Blade Gap Adjustment
  • Shadow Line for Material Placement
$60,263.79
$49,629.00
  • Many Optional Tooling Set Available 
  • Perfect For Any Fabrication Shop 
  • Metal Ring Roller 
  • Made Using Only The Best Plate Steel
$314.50
$274.00
  • Vertical And Horizontal Bending 
  • Digital Readout 
  • Integrated Stiffening Rods 
  • Three Driven Rolls 
$110,536.62
$90,999.00
  • Shelf Size (L x W): 21 ¾” x 14”
  • Shelf Max Weight Capacity: 100 lbs.
  • Cart Base Max Weight Capacity: 425 lbs.
  • Heavy 14ga Steel Construction
$419.00
  • Driven Rolls 2
  • Roll Adjustment Manual
  • Pipe Capacity Size: .5” (sch.40) / Min. Dia.: 14”
  • Round Tube Capacity Size: 1" (.0625") Min. Dia.: 16"
$6,691.85
$5,499.00
  • Back Gauge Length: 24"
  • Thickness (SS): 16 ga. (20 ga.)
  • Front Gauge Length: 24"
  • Blade Angle: 1°
$6,932.36
$5,709.00
  • 28 Strokes Per Minute
  • 8 Gauge Mild Steel Shearing Capacity
  • Built For Heavy Duty Production
  • 10 HP Motor
$40,511.19
$33,359.00
  • 52" x 1/4" Mild Steel Capacity
  • NC Back Gauge
  • ELGO® Controller
  • Front Material Guides
$55,394.50
$45,619.00

Baileigh Industrial first arose in 1999 with cutting edge designs and materials that handle maximum capacities with ease. They are located in Manitowoc, Wisconsin along with other locations all around the world. They specialize in Metal Forming and shaping, Hydraulic benders made from heavy steel plates and Industrial grade hydraulics, and Heavy duty machines in manual and CNC configurations. They also produce Planers such as Helical Head Planers and Spiral Head Planers.

If you are in need of Heavy duty machines or Hydraulic benders or interested in Baileigh Industrials’ Planers please contact us. Here at Elite Metal Tools we offer low prices and one of a kind customer service.