Baileigh Industrial

• Maximum Depth of Cut (Resaw): 2"
• AMP Draw: 15
• Throat Capacity (IN): 22.375"
• Pieces Included: Material hold down, Onboard Dust Blower, Foot Pedal Operation Switch

• 3000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

• Speeds 2625 fpm
• Belt/Blade Size 25" x 75"
• Max Stock Width 24"
• Maximum Stock Height 6"

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 600 CFM
• 110V
• 1.5 Hp
• 6"x4" Dust Collection Port

• Table Saw RPM: 4200
• Cut Capacity at 45° Miter (In.): 14" x 2" (L), 14" x 1-3/8" (R)
• Cut Capacity at 90° (In.): 14" x 4"
• Miter Capacity (Deg.): 52° L, 60° R

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• Swing 15"
• Spindle MT2
• Drill Capacity 0.7"
• Spindle Travel 3.1"

• Maximum Rabbeting Capacity: 1/2"
• Cutter Head Diameter: 3-1/4"
• Max Stock Width: 8"
• Jointer Maximum Cutting Depth: 1/8"

• 220V Single Phase
• 5 Horse Power
• 3600/5100/8000/10000 RPM
• 4" Dust Collection Port

• Motor Hp 1.5
• Filter Type Four Stage (Stainless steel mesh - Aluminum mesh - Pre-pleated filter - HEPA filter)
• Number of Filters 4
• Filter Size Stainless steel mesh(21.8" x 11.6")- Aluminum mesh(21.25" x 17.25" x 7/8") - Pre-pleated filter(23.3" x 23.3" x 1.5") - HEPA filter(24" x 24" x 11.5")
• Power 110V

• Cuts Non-ferrous metals - Blade turns at 3200 rpm
• 41/4" Capacity
• Miters left and right
• 220V, 3PH

• CFM: 500 (Required)
• Spindle: 1
• Table Saw Blade Diameter: 10"
• Maximum Work Piece Size: 59" x 16-1/2"

• 2300 CFM
• 220V Single Phase
• 3 Hp
• 8"x4" Dust Collection Port

• 110V
• 1 Horse Power
• 4" Dust Collection Port
• 1725 Rpm

• 110V
• 1 Horse Power
• 4" Dust Collection Port
• 5000 Rpm

• 2000 Rpm
• 220V Single Phase
• 2 Horse Power
• 4" Dust Collection port

• Speeds 6.5 to 40 fpm
• Power 110V
• Horse Power 1/8
• Weight (lbs) 30 lbs

• Maximum Load Capacity: 132 lbs.
• Drilling Capacity: 5/8" Mild Steel
• Swing: 14"
• Spindle Taper: B16

• 220V SIngle Phase
• 2 Horse Power
• 3" Dust Collection Port
• 1 Outlet

• 11" Blade
• Semi-Automatic operation - manual feed also available
• Self centering vice
• 2.75" Tube Capacity 

• 110V
• 0.5 Horse Power
• 1720 Rpm
• 3" Max Mortising Depth

• Power 220V Single Phase
• Horse Power 1/4
• Weight (lbs) 80 lbs
• Rotation Forward and Reverse