Baileigh Industrial

  • Filter Type 99% 5 Micron – 91% 1 Micron
  • Number of Filters 2
  • Filter Size 20" x 24"
  • CFM 2450 Max – 2132 Filtered Air
$2,276.54
$1,853.00
  • Spindle Speed 150-3000rpm
  • Spindle Travel 5.3" 
  • Drill Capacity Steel 1" 
  • Quill Diameter 2.44" 
$5,642.74
$4,649.00
  • Travel Speed: 315 Inches Per Minute
  • Table Load Capacity: 1" Mild Steel
  • Capacity: Depends on Plasma System Chosen
  • Drive: Servo Motor
$48,570.21
$39,999.00
  • Thickness (SS): 12 ga. (16 ga.)
  • Box Depth: 6"
  • Bend Angle: 0 – 135°
  • Finger Sizes: 3" – 4" – 5" – 6"
$13,161.64
$10,839.00
  • Filter Size 12" x 24"
  • CFM 1,255 Max – 916 Filtered Air
  • Remote Start Radio Frequency (RF) With Timer Included
  • Speeds 3
  • 48" x 10-gauge mild steel capacity 
  • Box, pan, and straight 
  • 11-finger assortment 
  • Programmable bend angle 
$32,784.50
$26,999.00
  • 120" x 14-gauge mild steel capacity 
  • Includes floor stand 
  • Stop rod and counterweight assist 
$13,355.93
$10,999.00
  • 2 Axis NC Back Gauge
  • Hydraulically Driven Bend Plate
  • Easy Degree Adjustment Auto-stop
  • Semi-Automatic bending mode with foot pedal control for increased productivity.
$96,850.21
$79,759.00
  • 96" x 12-gauge mild steel capacity 
  • Includes floor stand 
  • Stop rod and counterweight assist 
$12,021.14
$9,899.00
  • Allows for the operator to clamp the material with their foot, to keep hands free
  • Built from the best possible components
  • Easy to adjust gap adjustment
  • Spring loaded cylinder assists lifting the apron which gives assistance operator when bending at full capacity
$5,101.67
$4,199.00
  • Over 78" of bendable area
  • Uses a heavy duty magnet to clamp the material between itself and the bending "clamp bar"
  • 6 Ton of power is constant across the entire beam
  • 220V / 1-Phase
$10,480.45
$8,629.00
  • Thickness (SS): 16 ga. (20 ga.)
  • Box Depth: 2.5"
  • Bend Angle: 0 – 135°
  • Finger Sizes: 17 Total, 2 x 1-1/2”, 4 x 2”, 5 x 3”, 6 x 6”
$6,018.21
$4,949.00
  • 2.95" Quill Diameter 
  • Spindle Speed 85-2000rpm 
  • 2HP Motor 
  • 1.5" Drill Capacity 
$6,855.71
$5,649.00
  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4” swing to tackle large pieces of material
  • Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity
$14,741.43
$11,999.00
  • 48" x 16-gauge mild steel capacity 
  • Includes floor stand 
  • Stop rod 
$2,475.91
$2,039.00
  • 24" x 16"-gauge mild steel capacity
  • Includes floor stand
  • Stop rod and counterweight assist
  • 5-finger assortment
$1,613.79
$1,365.00
  • Thickness (SS): 16 ga. (20 ga.)
  • Clamping Force: 6 ton
  • Bend Angle: 0 - 180°
  • Max. Clamping Bar Lift: Unlimited
$12,020.21
$9,899.00
  • Thickness (SS): 14 ga. (18 ga.)
  • Stand: Yes
  • Box Depth: 4"
  • Bend Angle: 0 – 135°
$6,191.64
$5,099.00
  • 120" x 16-gauge mild steel capacity 
  • Includes floor stand 
  • Stop rod and counterweight assist 
$12,690.45
$10,449.00
  • 72" x 10-gauge mild steel capacity 
  • Box, pan, and straight 
  • 17-finger assortment 
  • Programmable bend angle 
$35,067.36
$28,879.00
  • Adjustable counterweight apron assist
  • Adjustable beam
  • 6" box depth
  • 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 11 - 6"
$23,939.57
$19,699.00
  • Adjustbale counterweight apron assist
  • Adjustable beam
  • 6" box depth
  • 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 9 - 6"
$24,563.79
$20,229.00
  • 3.5HP Motor 
  • 1.5" Drill Capacity 
  • 108-1800rpm Spindle Speed
  • 7.48" Spindle Travel 

 

$7,247.14
$5,899.00
  • Spindle Taper MT3
  • Table Slot .625"
  • Tapping Capacity 1/2"
  • Main Motor 2 hp
$6,878.57
$5,599.00

Baileigh Industrial first arose in 1999 with cutting edge designs and materials that handle maximum capacities with ease. They are located in Manitowoc, Wisconsin along with other locations all around the world. They specialize in Metal Forming and shaping, Hydraulic benders made from heavy steel plates and Industrial grade hydraulics, and Heavy duty machines in manual and CNC configurations. They also produce Planers such as Helical Head Planers and Spiral Head Planers.

If you are in need of Heavy duty machines or Hydraulic benders or interested in Baileigh Industrials’ Planers please contact us. Here at Elite Metal Tools we offer low prices and one of a kind customer service.