Baileigh Industrial

• Table Size 63" x 7"
• Programming 40 Programs/ 25 Steps per Program
• Back Gauge Length 21.5"
• Return Speed 3.3" / sec.

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 31" Width
• 1/4" Mild Steel Capacity
• Multi Vee Bottom Die
• DRO For Back Gauge And Down Position

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• 2-Axis CNC Control
• Repetitive Accuracy Is Within +- .004 MM
• Fiessler Light Curtain
• Rexroth Hydraulic Compenents Throughout

• Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
• Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
• Distance from Spindle to Column Center: 13-3/4" to 63"
• Diameter of Column: 13.7"

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• Available In Both 10' and 13' Lengths
• 2-Axis CNC Controls
• Repetitive Accuracy Is Within + - .04mm
• Quick Release Tooling System

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• 2" maximum drilling capacity
• Heavy duty construction
• Power down feed
• Large 63" column

• 1.57" maximum drilling capacity
• Heavy duty construction
• Power down feed
• 39.3" reach

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• 1.5HP Motor 
• 5/8" Tapping Capacity 
• 1" Drill Capacity 
• 5.3" Spindle Travel 

• Power- 220V / Three Phase
• 140 Tons Of Bending Force
• Standard With a Multi-Vee Bottom Die And Gooseneck Punch
• Accuracy of .01mm

• 50 Ton of Pressure
• 78" Bed Length
• 2-Axis CNC System
• 4HP Main Motor

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000

• Prefect for Production Bending, Punching and Shearing of Small Parts
• Cylinder Stroke Accuracy to +/- .002"
• Easy To Use Programmable NC Controller
• Manual Back Gauge Standard

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• 2 HP Motor
• 110/220V 1PH
• Table Size 20"
• 10" Blade

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• Electric Back Gauge With Manual Micrometer Adjustment Standard
• Extra-Wide Guideways For Exceptional Rigidity
• Adjustable 2-Step Downward Travel For Higher Productivity
• Oversized Hydraulic Tank With High-Performance Pump Smooths And Stabilizes Oil Flow