Baileigh Industrial

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 220V Single Phase
• 5 Horse Power
• 5" Dust Collection Port
• 16/20 FPM

• 5000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
• Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
• Distance from Spindle to Column Center: 13-3/4" to 63"
• Diameter of Column: 13.7"

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• 2" maximum drilling capacity
• Heavy duty construction
• Power down feed
• Large 63" column

• 1.57" maximum drilling capacity
• Heavy duty construction
• Power down feed
• 39.3" reach

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• Maximum Depth of Cut (Resaw): 1/8"
• Cutter Head Diameter: 3-1/4"
• Max Stock Width: 20"
• Maximum Stock Height: 8"

• 1.5HP Motor 
• 5/8" Tapping Capacity 
• 1" Drill Capacity 
• 5.3" Spindle Travel 

• Max Stock Width: 22"
• Maximum Stock Height: 9"
• Feed Speed: 2 Speed 20 & 30 fpm
• Maximum Depth of Cut (Resaw): 1/4"

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• 220 V 3 PH
• 7.5 HP
• Table Saw Arbor 1"
• RPM 3000/4000/5000

• Max Stock Width 13'
• Maximum Stock Height 6"
• Minimum Stock Thickness 1/8""
• Minimum Stock Length 7"

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• 2 HP Motor
• 110/220V 1PH
• Table Size 20"
• 10" Blade

• Maximum Depth of Cut (Resaw): 1/8"
• Cutter Head Diameter: 3"
• Max Stock Width: 15'
• Minimum Stock Thickness: 3/16"

• 220V Single Phase 
• 10 Horse Power
• 5000 Rpm
• 20 to 30 Fpm

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• 1/8HP Coolant Motor 
• 1.5" Drill Capacity 
• 85-4000rpm Spindle Speed
• Tapping Capacity 3/4"