Baileigh Industrial

  • 2.95" Quill Diameter 
  • Spindle Speed 85-2000rpm 
  • 2HP Motor 
  • 1.5" Drill Capacity 
$6,855.71
$5,649.00

  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4” swing to tackle large pieces of material
  • Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity
$14,741.43
$11,999.00

  • True Vertical Movement At All Stations
  • Electronic Stroke Control
  • Manual Back Gauge
  • Quick Release Coupler Enables Easy Tool Changeover
$22,365.93
$18,419.00

  • 62 Ton 
  • Single Phase 220 Volt 
  • Easy Tooling Setup 
  • Electronic Stroke Control 
$30,149.50
$24,829.00

  • 2340 CFM
  • HEPA Filter Standard
  • Tool-Less Filter Maintenance
  • CSA - U.S. Certified
$11,849.48
$9,759.00

  • The Industry's Largest Horizontal Bending Press
  • 7.5 HP Motor
  • Produces 78 Tons of Fabricating Force
  • Custom Tooling is Available Upon Request
$48,570.21
$39,999.00

  • 62 Ton 
  • Electronic Stroke Control 
  • Manual Back Guage 
  • Jog Feature For Easy Tooling Setup 
$28,425.21
$23,409.00

  • 224 Tons Of Bending Pressure
  • Available In 10' Or 13' Tables
  • Accuracy Of + - .01mm
  • Comes Standard With A Multi-Vee Bottom Die And Gooseneck Punch
$117,286.64
$96,589.00

  • Electronic Strock Control 
  • 220 Volt Single Phase 
  • Quick Release Coupler 
  • 4 Stations 
$23,738.07
$19,549.00

  • Dual Cylinder / Dual Operator Design
  • Oversize Tables With Quick Adjust Material Stops
  • Electric Back Gauge With Adjustable Timer
  • Quick Release Coupler Enables Easy Tool Changeover
$54,325.93
$44,739.00

  • Electric Back Gauge With Manual Micrometer Adjustment Standard
  • Extra-Wide Guideways For Exceptional Rigidity
  • Adjustable 2-Step Downward Travel For Higher Productivity
  • Oversized Hydraulic Tank With High-Performance Pump
$45,461.59
$37,439.00

  • Shear Capacity Flat 4" x 5/16"
  • Shear Capacity Angle Iron 2-3/8" x 1/4"
  • Shear Capacity Plate 1/4"
  • Shear Capacity Round 5/8"
$1,200.93
$1,046.00

  • 4HP Motor 
  • 6691 fpm Belt Speed
  • Pneumatic / Manual Power 
  • Contact Wheel DiaxWidth 7.87"x3"
$3,570.00
$2,899.00

  • Motor HP - 1.5HP
  • Number of Filters - 2
  • Filter Size - 15" x 26"
  • Power - Single Phase, 220Volt
$8,265.78
$6,809.00

  • 3.5HP Motor 
  • 1.5" Drill Capacity 
  • 108-1800rpm Spindle Speed
  • 7.48" Spindle Travel 

 

$7,247.14
$5,899.00

  • Filter Type Three Stage (Aluminum mesh - Polyester Teflon Coated Cartridge with Pulse Clean - HEPA filter)
  • Number of Filters 3
  • Filter Size Aluminum mesh(21.25" x 17.25" x 7/8") - Polyester Teflon Coated Cartridge with Pulse Clean(Ø11.2" x 13" L) - HEPA filter(18" x 20" x 5.9")
  • Power 110V
$10,492.18
$8,639.00

  • Spindle Taper MT3
  • Table Slot .625"
  • Tapping Capacity 1/2"
  • Main Motor 2 hp
$6,878.57
$5,599.00

  • Available In Both 10' and 13' Tables
  • Puts Out 179 Tons Of Force
  • Multi-Vee Botton Die and Gooseneck Punch Come Standard
  • Great For Doing Multiple Bends Over The Entire Length Of The Press Brake
$107,390.21
$88,439.00

  • Spindle Travel: 5.9"
  • Quill Diameter: 2.44”
  • Tapping Capacity: 5/8"
  • Drill Capacity: 1.25"
$8,147.14
$6,719.00

  • 1/8HP Coolant Motor 
  • 1.5" Drill Capacity 
  • 85-4000rpm Spindle Speed
  • Tapping Capacity 3/4" 
$8,461.43
$6,975.00

  • Adjustable material stop
  • Nine sets of punches and dies included
  • Extra long handle for increased leverage
  • Includes round punches and dies for 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" and 5/8"
$1,762.94
$1,449.00

  • Shaft Diameter: 1"
  • Dust Collection: Integrated dust chute
  • Grit: 36 & 60
  • Wheel Size: 10" x 1" x 1" - Aluminum Oxide

  • Electric Back Gauge With Manual Micrometer Adjustment Standard
  • Extra-Wide Guideways For Exceptional Rigidity
  • Adjustable 2-Step Downward Travel For Higher Productivity
  • Oversize Hydraulic Tank With High-Performance Pump Smooths And Stabilizes Oil Flow
$64,355.93
$52,999.00

  • 224 Tons Of Bending Pressure
  • Available In Lengths Of 10' or 13'
  • Can Store Up to 40 Programs with 25 Bends
  • Accuracy of + - .01mm
$129,623.79
$106,749.00

Baileigh Industrial first arose in 1999 with cutting edge designs and materials that handle maximum capacities with ease. They are located in Manitowoc, Wisconsin along with other locations all around the world. They specialize in Metal Forming and shaping, Hydraulic benders made from heavy steel plates and Industrial grade hydraulics, and Heavy duty machines in manual and CNC configurations. They also produce Planers such as Helical Head Planers and Spiral Head Planers.

If you are in need of Heavy duty machines or Hydraulic benders or interested in Baileigh Industrials’ Planers please contact us. Here at Elite Metal Tools we offer low prices and one of a kind customer service.