Table Saws

  • Layout
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
View Details
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,335
As low as $433.38/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$18,060
As low as $357.40/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$11,025
As low as $358.31/mo
View Details
Shop Fox 2HP 120V 10” Open Stand Hybrid Table Saw W1837 at Elite Metal Tools
Shop Fox 2HP 120V 10” Open Stand Hybrid Table Saw W1837
  • Maximum Depth of Cut At 90 Degrees: 3‐1/4 in.
  • Maximum Depth of Cut At 45 Degrees: 2‐1/4 in.
  • Max Rip Right of Blade w/Included Fence & Rails: 30 in.
  • Max Rip Left of Blade w/Included Fence & Rails: 15 in.
$1,839
As low as $59.76/mo
View Details
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,345
As low as $303.71/mo
View Details
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
View Details
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B at Elite Metal Tools
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$6,195
As low as $201.33/mo
View Details
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214 at Elite Metal Tools
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,670
As low as $184.27/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$18,060
As low as $357.40/mo
View Details
Shop Fox 2HP 115V Single Phase 10” Hybrid Table Saw with Riving Knife W1888 at Elite Metal Tools
Shop Fox 2HP 115V Single Phase 10” Hybrid Table Saw with Riving Knife W1888
  • Maximum Depth of Cut At 90 Degrees: 3‐1/8 in.
  • Maximum Depth of Cut At 45 Degrees: 2‐1/8 in.
  • Max Rip Right of Blade w/Included Fence & Rails: 31‐1/2 in.
  • Max Rip Left of Blade w/Included Fence & Rails: 11‐3/8 in.
MSRP: $2,725
$2,495
As low as $81.08/mo
View Details
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12 at Elite Metal Tools
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$3,885
As low as $126.26/mo
View Details
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,230
As low as $429.97/mo
View Details
Cantek 10’ Sliding Table with Powered Rise and Fall D405A at Elite Metal Tools
Cantek 10’ Sliding Table with Powered Rise and Fall D405A
  • 7.5 HP main motor with 1HP scoring motor
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • Sliding table dimension: 126” x 15 ½”
$15,645
As low as $309.61/mo
View Details
Shop Fox 5 HP 230V Single Phase 10" Sliding Table Saw W1811 at Elite Metal Tools
Shop Fox 5 HP 230V Single Phase 10" Sliding Table Saw W1811
  • Max. Depth of Cut At 90°: 3-1/8"
  • Main Blade Arbor Speed: 4000 RPM
  • Scoring Blade Arbor Speed: 8000 RPM
  • Motor: 5 HP, 230V, Single Phase
$6,295
As low as $204.58/mo
View Details
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP three phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$10,710
As low as $348.07/mo
View Details
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo
View Details
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,345
As low as $303.71/mo
View Details
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo
View Details
Grizzly Industrial 10” 5 HP 230V Single Phase Sliding Table Saw G0623X at Elite Metal Tools
Grizzly Industrial 10” 5 HP 230V Single Phase Sliding Table Saw G0623X
  • Motor: 5 HP, 230V, single-phase
  • Sliding table size: 12-1/4" x 63"
  • Maximum rip capacity: 33"
  • Main table dimensions: 14-3/8" x 27"
$5,278
As low as $171.53/mo
View Details
Cantek 7.5HP Three Phase 14” Tilt Arbor Table Saw TA14 at Elite Metal Tools
Cantek 7.5HP Three Phase 14” Tilt Arbor Table Saw TA14
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,355
As low as $174.03/mo
View Details
Cantek 10’ Sliding Table with Powered Rise and Fall D405A at Elite Metal Tools
Cantek 10’ Sliding Table with Powered Rise and Fall D405A
  • 7.5 HP main motor with 1HP scoring motor
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • Sliding table dimension: 126” x 15 ½”
$15,645
As low as $309.61/mo
View Details
Cantek 5HP 230V Three Phase 12” Tilt Arbor Table Saw TA12 at Elite Metal Tools
Cantek 5HP 230V Three Phase 12” Tilt Arbor Table Saw TA12
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Table height: 34 1/4″
$3,780
As low as $122.85/mo
View Details
Grizzly Industrial 14” Sliding Table Saw with Digital Fence G0853 at Elite Metal Tools
Grizzly Industrial 14” Sliding Table Saw with Digital Fence G0853
  • Main motor: 10 HP, 220V/440V, 3-phase
  • Length of crosscut: 126"
  • Sliding table size: 15-5/8" x 126"
  • Maximum rip capacity: 51-1/2"
$17,924
As low as $354.71/mo
View Details