Shop Fox 2HP 120V 10” Open Stand Hybrid Table Saw W1837

Description

The best features of the cabinet and contractor saws combined into a hybrid. The Shop Fox W1837 10" Open Stand Hybrid Table Saw was named as one of the Best Hybrid Table Saws for Contractors or DIY Projects by Tool Digest. The biggest perk was that the saw has a single-phase motor that comes prewired to operate on a 20A circuit. This is a big deal for amateur and novice woodworkers that don’t want the added expense of hiring an electrician to add an outlet in the garage or shop. Thanks to the hybrid design, cutting capacities are not diminished and stand toe-to-toe with the most expensive cabinet saws in the market. Like a contractor-style saw, its low weight and built-in mobile base allow it to be easily moved where you need it. The enclosed steel upper-stand has a bottom-facing 4" dust port allowing for maximum dust containment. The fence features easy lift-off and adjustability to create a simpler and more enjoyable user experience.

The W1837 features cabinet-mounted cast-iron trunnions to absorb vibration and guarantee the appropriate miter slot and blade-to-fence alignment. The table is cast-iron and has been precision-ground for a smooth cutting action. The serpentine belt and pulley system lends to a smoother and quieter operation with better power transfer than a standard V-belt drive system. This hybrid saw is sure to be the envy at any shop or worksite.

The W1837 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. The W1837 manual was written by our U.S. based Technical Documentation Department. The complete and easy-to-read manual makes it easier to assemble and maintain your saw. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.

Features

• Precision‐Ground Cast‐Iron Table
• Powder‐Coated Steel Extension Wings
• Cast‐Iron Trunnions
• Easy‐Glide Fence System
• Quick‐Release Blade Guard Assembly
• 4" Dust Port
• T‐Slot Miter Gauge
• Included 10" x 40T Blade
• Built‐In Mobile Base

Specifications

• Product Dimensions
  • Weight: 241 lbs.
  • Width (side‐to‐side) x Depth (front‐to‐back) x Height: 64 x 40‐1/4 x 36 in.
  • Footprint (Length x Width): 21 x 19‐1/2 in.
  • Space Required for Full Range of Movement (Width x Depth): 64 x 37‐1/2 in.
• Electrical
  • Power Requirement: 120V or 240V, Single‐Phase, 60 Hz
  • Prewired Voltage: 120V
  • Full‐Load Current Rating: 15A at 120V, 7.5A at 240V
  • Minimum Circuit Size: 20A at 120V, 15A at 240V
  • Connection Type: Cord & Plug
  • Power Cord Included: Yes
  • Power Cord Length: 6 ft.
  • Power Cord Gauge: 14 AWG
  • Plug Included: Yes
  • Included Plug Type: NEMA 5‐15 for 120V
  • Recommended Plug Type: NEMA 6‐15 for 240V
  • Switch Type: ON/OFF Push Button w/Lockout Pin
• Main Motors
  • Horsepower: 2 HP
  • Phase: Single‐Phase
  • Amps: 15A at 120V, 7.5A at 240V
  • Speed: 3450 RPM
  • Type: Capacitor‐Start Induction
  • Power Transfer : Belt Drive
  • Bearings: Sealed & Permanently Lubricated
• Table Saw Type: Hybrid
• Maximum Blade Diameter: 10 in.
• Arbor Size: 5/8 in.
• Arbor Speed: 3450 RPM
• Maximum Width of Dado: 13/16 in.
• Blade Tilt Direction: Left
• Max Blade Tilt: 0–45 deg.
• Maximum Depth of Cut At 90 Degrees: 3‐1/4 in.
• Maximum Depth of Cut At 45 Degrees: 2‐1/4 in.
• Max Rip Right of Blade w/Included Fence & Rails: 30 in.
• Max Rip Left of Blade w/Included Fence & Rails: 15 in.
• Blade
  • Included Blade Information: 10" x 40T
  • Riving Knife/Spreader Thickness: 0.090 in.
  • Required Blade Body Thickness: 0.060 – 0.086 in.
  • Required Blade Kerf Thickness: 0.094 – 0.126 in.
  • Rim Speed at Max Blade Diameter: 9,025 FPM
• Table
  • Floor to Table Height: 35‐3/4 in.
  • Table Size with Extension Wings Width: 40‐1/4 in.
  • Table Size with Extension Wings Depth: 27 in.
  • Distance Front of Table to Center of Blade: 15‐1/2 in.
  • Distance Front of Table to Blade At Maximum Cut: 11‐1/2 in.
  • Main Table Size Thickness: 1‐5/8 in.
• Miter Gauge
  • Miter Gauge Slot Type: T‐Slot
  • Miter Gauge Slot Size Width: 3/4 in.
  • Miter Gauge Slot Size Height: 3/8 in.
• Construction
  • Table: Cast Iron
  • Wings: Stamped
  • Cabinet: Pre‐Formed Steel
  • Trunnions: Cast Iron
  • Fence Assembly: Aluminum
  • Rails: Aluminum
  • Miter Gauge Construction: Aluminum
  • Guard: Aluminum & Plastic
  • Body/Cabinet Paint Type/Finish: Powder Coated
  • Arbor Bearings: Sealed & Permanently Lubricated
• Number of Dust Ports: 1
• Dust Port Size: 4 in.