Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro

FREE SHIPPING

Manufacturer Part: EMT ID:
SnapTable PRO
13847

  • Comes with Trailer, Seam Notcher, Panel Cutter and Eave and Valley Hemmer
  • Complete full panel preparation in seconds
  • Meant for all standing seam metal roof panels
  • Maximum Panel Thickness: 20 GA
Details below

Description

Save TIME and MONEY with the SnapTable PRO and deliver factory-like quality on the job site. The SnapTable PRO is a towable, all-in-one metal roof panel preparation system for standing seam metal roofing projects. The SnapTable PRO is the ideal metal roofing tool to improve your panel preparation process. It is designed to perfect and speed up your sheet metal roof panel preparation process while producing factory-like cuts.

What’s Included?

This complete system is made up of 3 key components. Let’s take a look at each of them individually.

The Standing Seam Notcher

This powerful and effective metal notching tool creates the perfect cut through your standing seam ribs with little physical effort, basically eliminating the need for hand notchers. It notches the standing seam ribs on both male and female sides of the metal panel in seconds and can accommodate panel from 12″-24″. Use the notcher for straight or angle cuts with up to a 29″ offset. To notch at an angle, simply locate the desired angle on the degree operator ruler on the machine and shift the notcher on the operator side of the machine accordingly.

The Standing Seam Notcher comes with your choice of custom dies, with additional dies available for purchase.

The Panel Cutter

Welcome to the best standing seam cutting tool on the planet. The Panel Cutter helps you cut through metal roof panels in seconds, providing a perfect straight edge cut across the flats of each standing seam metal panel cleanly and evenly, free of burrs. The dual edge blade is designed to double the life expectancy of your blade, providing thousands of clean cuts during its life span. The Panel Cutter is built for a max cut length of 60″, can rotate 360 degrees, and comes with a base stand and wheels for easy transportation to and from your work site.

The Eave and Valley Hemmer

Create a perfect hem on your metal sheet roofing panel in seconds with the Eave and Valley Hemmer. This ingenious metal bending hemming tool allows roofers to bend sheet metal roofing panels for standing seam roofing jobs without the need for pliers, snips, hand seamers or other hand tools. Unlike other sheet metal bending tools, the Eave and Valley Hemmer helps you create perfect lines consistently with on your hips, eaves and valleys. And because it works with every possible profile, this machine pairs perfectly with any sheet metal forming machine, adding a powerful, time-saving component to your setup.

Features

  • Complete full panel preparation in seconds
  • Cuts, notches and hems your eaves, hips and valleys
  • Dies available to accommodate multiple profiles
  • Meant for all standing seam metal roof panels
  • Transportable
  • Adjustable jacks for leveling

Specifications

  • Panel Sizes: 12 inches – 24 inches
  • Notching Offset: 29 inches
  • Cutting Capabilities: Up to 60 inches
  • Hemming Capabilities: Up to 60 inches
  • Cutter & Hemmer Rotating Capabilities: 360 degrees
  • Weight: 1,150
  • Suggested Maximum Panel Thickness: 20 gauge
  • Purpose: All-in-one panel preparation tool – notches, cuts, and hems panels in seconds
  • Can Be Used With: Cor-Ten, Nail Strip,  SnapLock, Mechanical Seam, Zip-Rib, and many more options.

Benefits of the SnapTable PRO Standing Seam Tool

What makes the SnapTable PRO the perfect standing seam tool for your professional roofing needs? Let’s look at just a few of the advantages.

1. All-in-One Functionality

The SnapTable PRO is designed as an all-in-one tool, equipped with all the functions you need to prepare flawless metal panels for a standing seam metal roofing system. No more hauling multiple tools to the job site; the SnapTable PRO has it all!

2. Complete Versatility

The SnapTable PRO is designed for use with all types of standing seam metal roof panels, including  Nail Strip, Cor-Ten, Snap Lock panels, Mechanical Seam, Zip-Rib and others. Use it to prepare panels between 12-24 inches in size with cutting and hemming capabilities of up to 60 inches. It can even handle angle cuts for gables, hips, and valleys. You’ll be amazed at how much you can do with one workstation.

3. Single-Person Operation

The cost of skilled labor can quickly cut into your bottom line. The SnapTable PRO can be operated by a single person (as opposed to a team of 2-3 laborers) with minimal physical effort–saving you between 35-40 percent in labor costs on average.

4. User-Friendly

Not only can the SnapTable PRO be operated by one person–it’s so easy to use that you can assign almost anyone from your team to operate it, even your novices. Save your more expensive skilled labor for the more technical tasks of roofing while your less experienced crew prepare consistently perfect metal panels.

5. Time-Saving Operation

Prepare and cut perfect standing seam metal roofing panels in seconds, rather than minutes. The typical method of prepping panels requires a team of people to notch, cut and hem the panels manually, which can be quite costly both in time and labor. The SnapTable PRO simplifies the process and speeds up your operation significantly.

6. Consistent Quality

Manual preparation of metal roofing panels can yield inconsistent results unless you have only your most skilled craftsmen on the job. With the SnapTable PRO, you’re assured of producing precise, factory-quality metal roofing panels every time, with stunning accuracy and very little effort.

7. Lightweight and Portable

Forget the old days of prepping panels off-site and hauling them to the job site. The SnapTable PRO is installed on a super-lightweight towable trailer, enabling you to transport it to any job site and cut your standing seam panels on the spot. And since this tool requires no electricity, you can set it up anywhere on the job site without looking for a power source.

8. Built to Last

The SnapTable PRO is proudly designed and manufactured in the USA, made of top-quality, powder-coated steel. You’ll be amazed at its ease of use and consistency of quality, and you’ll be equally pleased at how much you’ll save in time and labor costs as a result. Designed smartly with the professional roofer in mind, we believe this is the last standing seam panel tool you’ll ever need.

Manufacturer
SKU
SnapTable PRO
Shipping Method
Flatbed
Weight
1,150 lb
Dimensions
100 × 50 × 50 in
Country of Origin
United States of America
Warranty
2 Years
(Parts)
There are currently no reviews for this product.
Be the first to review this product.
Looking for parts? Let us know what you need in the form, or give us a call at 281-241-9504
Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro
  • Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro at Elite Metal Tools
  • Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro at Elite Metal Tools
  • Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro at Elite Metal Tools
  • Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro at Elite Metal Tools
  • Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro at Elite Metal Tools
  • Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro at Elite Metal Tools
  • Swenson Shear All-In-One Towable Metal Roofing Standing Seam Tool Trailer Snaptable Pro at Elite Metal Tools
Request a Quote

Experience the Elite Advantage today. Fast quote turn around, FREE SHIPPING, and much more.

Request Financing?

What is the Elite Advantage?

Free Shipping at Elite Metal Tools

Free Shipping

The Elite Metal Tools Promise!
Price Matching at Elite Metal Tools

Price Matching

The best prices on the web.
Customer Service at Elite Metal Tools

Customer Service

Our customers matter.
Knowledgeable Staff at Elite Metal Tools

Knowledgeable Staff

In our business, information is king.
Product Selection at Elite Metal Tools

Product Selection

Your one-stop-shop.