Shop Fox 3HP 240V Three Phase 22” x 42” Variable Speed Wood Lathe W1852

Description

Wood turners who enjoy making large bowls, vases, furniture pieces, and other large-diameter projects require power, capacity, and high-torque to meet their performance needs. You get all three and then some with this burly lathe that weighs in at over a quarter-of-a-ton. With a 3 HP, 3-phase motor that runs off of single-phase power, electronic variable-speed control, 22" of swing, and 1-1/4" x 8 TPI RH spindle, this lathe delivers the goods to gratify even the most discerning of turners. Features a variable-speed range of 100 - 3200 RPM, perfect for both large and small turning projects and finishing.

Features

• Low Speed Range of 100 –1200 RPM, and High‐Speed Range of 330–3200 RPM
• Electronic Variable‐Speed Control with Digital Spindle‐Speed Tachometer
• Headstock Rotates 180‐Deg. and Positions Anywhere Along the Bed
• Variable Frequency Drive for 3‐Phase Speed Control with Single‐Phase Power
• 3‐Phase Motor Allows for Superior Torque When Turning at Low Speeds
• 10‐Deg. Spindle Indexing
• Tailstock, Headstock, and Tool Rest Support Feature Lever‐Action Cam Locks for Quick Positioning
• Forward/Reverse Spindle Control
• 4‐1/4" Tailstock Barrel Travel

Specifications

• Product Dimensions
  • Weight: 490 lbs.
  • Width (side-to-side) x Depth (front-to-back) x Height: 81 x 23 x 49‐1/2 in.
  • Footprint (Length x Width): 65‐1/2 x 20 in.
• Electrical
  • Power Requirement: 240V, Single‐Phase, 60 Hz
  • Full-Load Current Rating: 13.5A
  • Minimum Circuit Size: 20A
  • Connection Type: Cord & Plug
  • Power Cord Included: Yes
  • Power Cord Length: 6 ft.
  • Power Cord Gauge: 12 AWG
  • Plug Included: Yes
  • Included Plug Type: NEMA 6‐20
  • Switch Type: ON/OFF Push Button Switch w/Safety Cover
  • Inverter (VFD) Type: Delta VFD‐MS
  • Inverter (VFD) Size: 3 HP
• Main Motor
  • Horsepower: 3 HP
  • Phase: 3‐Phase
  • Amps: 8A
  • Speed: 1725 RPM
  • Type: TEFC Induction
  • Power Transfer: Belt Drive
  • Bearings: Sealed & Permanently Lubricated
• Operation
  • Swing Over Bed: 22 in.
  • Swing Over Tool Rest Base: 18 in.
  • Distance Between Centers: 42 in.
  • Max. Distance Tool Rest to Spindle Center: 8 in.
  • No of Spindle Speeds: Variable
  • Spindle Speed Range: 100 – 3200 RPM
  • Floor to Center Height: 46‐1/4 – 46‐7/8 in.
• Spindle
  • Spindle Taper: MT#2
  • Spindle Thread Size: 1‐1/4" x 8 TPI
  • Spindle Thread Direction: Right Hand
  • Spindle Bore: 3/8 in.
  • Type of Included Spindle Center: Spur
  • Indexed Spindle Increments: 10 deg.
  • No of Indexes: 36
• Tool Rest
  • Tool Rest Width: 14 in.
  • Tool Rest Post Diameter: 1 in.
  • Tool Rest Post Length: 2‐1/4 in.
  • Tool Rest Base Height: 2 in.
• Tailstock
  • Tailstock Taper: MT#2
  • Type of Included Tailstock Center: Live
• Construction
  • Bed: Precision‐Ground Cast Iron
  • Frame: Cast Iron
  • Stand: Cast Iron
  • Base: Cast Iron
  • Headstock: Cast Iron
  • Tailstock: Cast Iron
  • Paint Type/Finish: Enamel
• Bed Width: 10 in.
• Faceplate Size: 6 in.

Options

• Spur Center
• Cupped Live Center
• Knock‐Out Tool
• Tool Rest
• Faceplate 6"
• Indexing Pin