Shop Fox 0.75HP 110V Single Phase 13.25” Oscillating Floor Drill Press W1848
Manufacturer Part: | EMT ID: |
W1848
|
17715
|
- Spindle Taper: JT33
- Spindle Travel: 3‐1/8 in.
- Max. Distance From Spindle to Column: 6‐5/8 in.
- Drilling Capacity (Mild Steel): 5/8 in.
Description
With the oscillating motion, this is much more than just a floor drill press. The Shop Fox W1848 13-1/4" Oscillating Floor Drill Press can be used for efficient contour sanding in addition to traditional drilling. Converting from drilling operations to sanding operations takes a matter of seconds with just a few tool-free steps. The W1848 is fitted with a 1–16mm JT33 keyed drill chuck, offers up to 3-1/8" of travel and a drilling capacity of 5/8" through mild steel. With the oscillating feature, the oscillating stroke length is 3/4". The 12-3/8" diameter, round table allows for drilling and surface sanding at different angles as it tilts 90° in both directions. The table has a clearance hole for use while sanding. This clever design incorporates a 2-1/2" dust collection port so that sanding is less messy.
Like all Shop Fox drill presses, the W1848 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1848 manual was written by Shop Fox’s U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your drill press. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the drill press are available online and shipped from the Woodstock parts warehouse in Springfield, MO.
Features
- Sanding drum shaft
- 2-1/2" Table dust port
- 3/4" Oscillating spindle
- 12 Speeds
- 3/4 HP motor
- Cushioned grip quill handles
- 3/64"–5/8"Chuck
- Includes 7/8", 1-7/16", and 1-15/16" Sanding Drum Set (D2677)
Specifications
- Product Dimensions
- Weight: 122 lbs.
- Width (side‐to‐side) x Depth (front‐to‐back) x Height: 15 x 24 x 63 in.
- Footprint (Length x Width): 17‐1/2 x 11 in.
- Electrical
- Power Requirement: 110V, Single‐Phase, 60 Hz
- Full‐Load Current Rating: 9A
- Minimum Circuit Size: 15A
- Connection Type: Cord & Plug
- Power Cord Included: Yes
- Power Cord Length: 72 in.
- Power Cord Gauge: 18 AWG
- Plug Included: Yes
- Included Plug Type: 5‐15
- Switch Type: Paddle Safety Switch w/Removable Key
- Main Motor
- Horsepower: 3/4 HP
- Phase: Single‐Phase
- Amps: 9A
- Speed: 1725 RPM
- Type: TEFC Capacitor‐Start Induction
- Power Transfer: Belt
- Bearings: Shielded & Permanently Lubricated
- Centrifugal Switch/Contacts Type: Internal
- Operation
- Type: Oscillating
- Swing: 13‐1/4 in.
- Spindle Taper: JT33
- Spindle Travel: 3‐1/8 in.
- Max. Distance From Spindle to Column: 6‐5/8 in.
- Number of Spindle Speeds: 12
- Range of Spindle Speeds: 250 ‐ 3050 RPM
- Max. Head Swivel: 360 deg.
- Drilling Capacity (Mild Steel): 5/8 in.
- Drill Chuck Type: JT33 Key Chuck
- Drill Chuck Size: 3/64 ‐ 5/8 in.
- Oscillating Stroke Length: 3/4 in.
- Spindle
- Quill Diameter: 1.565 in.
- Table
- Max. Table Tilt (Left/Right): 90 deg.
- Table Swivel Around Center: 360 deg.
- Table Swivel Around Column: 360 deg.
- Max. Movement of Work Table: 25‐1/4 in.
- Table Diameter: 12‐3/8 in.
- Table Thickness: 1 in.
- Vertical Table Travel: Crank Handle Operation
- Number of T‐Slots: 5
- T‐Slot Size: 1/2 in.
- T‐Slot Centers: 3 in.
- Construction
- Table: Precision‐Ground Cast Iron
- Column: Steel
- Spindle Housing: Cast Iron
- Head: Cast Iron
- Base: Cast Iron
- Paint Type/Finish: Enamel
- Depth Stop Type: Threaded Rod w/Positive Stop
- Number of Dust Ports: 1
- Dust Port Size: 2 in.
Manufacturer | |
SKU |
W1848
|
UPC |
754001014077
|
Shipping Method |
LTL Freight
|
Weight |
139 lb
|
Dimensions |
58 × 22 × 11 in
|
Country of Origin |
China
|
Warranty |
2 Years
|