SCM Group Minimax 230V Single Phase 12” Blade 8.5ft Sliding Table Saw SC 4E

Description

Introducing the SCM Group Minimax new sliding table saw, the Elite series has proven itself in American cabinet for many years. This machine boasts a full 8.5” stroke and features normally found on much more expensive machines for a fraction of the cost. See for yourself why the Minimax SC 4E 8.5ft machine stands in a class of its own.

Cast Iron Blade Group

The Minimax SC 4E has a massive cast iron blade group, this large design lends extra stability to the main blade and scoring blade. The cast iron blade group tilts on two trunnions to lessen degradation over time and the main blade and scoring blade raise independently to each other 

Cast Iron RIP Fence Knuckle

The Minimax SC 4E has a thick, cast-iron knuckle, to which the extruded aluminum rip fence is attached. It rides on a large steel round bar and is locked in place with a cam design for maximum rigidity. It micro-adjusts into place via a rack and pinion design

Scoring

The Minimax SC 4E comes standard with scoring. This allows you to not only accurately cut panels, but you can cleaning cut them too. This is important when cutting particle board, melamine, laminated panels, or anything else to which you want to apply some type of edge banding. If you are cutting solid wood, simply drop it below the table surface independently of the main blade. A 12” main blade capacity is featured without having to remove the scoring blade. The scoring is belt-driven from the main motor 

Separate Miter Gauge

The Minimax SC 4E comes with a separate miter gauge with two flip-stops. This way, for miter cuts, the operator can keep the main crosscut fence at 90° and use the separate miter gauge to do the angled cuts, saving time when mitering small panels

Extension Table and Slider Lock

The Minimax SC 4E features an additional table on the slider to assist in supporting larger panels. Also featured is the sliding table lock which allows the slider to be locked when pulled away from the blade that makes loading panels much easier 

Flip-Stops and Handwheels

The Minimax SC 4E crosscut fence comes with two interchangeable flip-stops. Two handwheels are included with the Minimax SC 4E for the main blade and scoring blade operating movements

Standard Equipment

• Solid cast iron saw unit with double support trunnions
• Double trunnions on both saw and shaper assemblies
• Aluminum sliding table and rail with hardened steel guide-ways
• European-style rip fence with cam lock, micro-adjustable
• Automatic self-braking motor
• Two interchangeable flip-stops with miter gauge
• Two interchangeable flip-stops with crosscut fence
• Round steel guide bar for rip fence
• Telescoping crosscut fence with two adjustable flip stops
• Additional table on the sliding table for support of panels with large dimensions
• Eccentric panel clamp
• 2-position sliding table lock
• Table extension on saw out-feed
• Scoring blade (adjusted independently of main blade)
• ¾” DADO capability
• Tool set and operator’s manual
• “CSA” – rated electrical components 

Specifications

• Fixed Table Size: 33” x 22”
• Squaring Stroke: 8.5’
• Table Height: 35.6”
• Ripping Capacity, right side of saw blade: 50”
• Tilting Arbor: 0° - 45°
• Max Cutting Height 0°/45°: 3.9”/2.8”
• Main Blade Diameter: 12.4”
• Main Blade Arbor Size: 5/8”
• Scoring Blade Diameter: 100mm
• Scoring Blade Arbor Size: 20mm
• Main Blade Speed: 4,000 rpm
• Scoring Blade Speed: 8,000 rpm
• Horsepower: 4.8HP
• Circuit Breaker: 30 amps
• Main Dust Extraction Port Diameter: 4¾”
• Saw Guard Dust Extraction Port Diameter: 2.5”
• Min Suggested Extraction Volume: 1,000 CFM
• Electrical Requirements: 230V Single Phase
• Machine Dims: 112” x 45” x 48”
• Approx Weight: 1,217 lbs