MPI 2200lbs Flat Capacity 1100lbs Round Capacity Permanent Lifting Magnet LM-1000-REN

Description

MPI Permanent Lifting Magnets make moving material easier without deforming or damaging the load. MPI work holding tools are versatile, compact, and easy to operate. They replace ropes, chains, and clamps because of the ability to easily control the magnet and the strong force. MPI Lifting Magnets are permanently magnetized so they do not need electricity to operate. Workpieces are safely loaded and unloaded with the simple on/off lever.

Since they contain high energy neodymium magnets, they offer incredible lifting capacity. The strong, stainless-steel lifting eye clamps the product from the top. This avoids deforming or damaging the load. Blocks of high-energy neodymium magnetic material power the Lifting Magnets. Using only one hand, the Easy-Switch system activates the magnet On and Off. This saves over 40% of the time it takes with other magnets on the market.

The magnet switches from On to Off by reversing the blocks. The On position’s reversible block is parallel. This statis block produces a concentrated magnetic field. The Off position’s reversible block rotates 180°. This creates a total magnetic short circuit. Permanent Lifting Magnets raise steel plates, bars, blocks, and press molds. They assist in the loading and unloading machines during the handling operation. Steel mills, scrap yards, and foundries use Lifting Magnets as well as warehouses, loading docks, shipyards, and coil and pipe distributors.

MPI’s Lifting Magnets fit round bar, pipe, and flat plates. They have a high lift capacity but are low weight. As a result, they provide extraordinary strength in a compact size. This also ensures safety and speed for lifting heavy loads. MPI’s flat lift magnets are available in six models with ratings of 330, 660, 1320, 2200, 3300, and 4400 lbs. Round lift ratings are approximately 50% of the flat ratings.

For safety, the actual breakaway force is 3+ times greater than the maximum flat lift ratings. The load limits are for AISI 1020 steel.

Features

• Strong welded design features compact body with only two recessed handle screws – no load bearing screws to come loose
• Stainless steel robust lifting eye permanently welded to the body – will never come loose
• Simple Easy Switch control switches magnet on and off easily, quickly, and safely with one hand
• 3:1 safety factor – every lifter is individually tested to meet load specifications and the results are recorded by serial number
• Air Gap Test – tear-off test is conducted with an air gap that simulates real operating conditions – true capacity
• Annual lifter re-certification service available from MPI – verifies lifting performance meets product specifications and may be used for your company’s annual OSHA lifting safety

Specifications

• Workload Limit Flat Material: 2,200 lbs
• Workload Limit Round Material: 1,100 lbs
• Diameter of Eye: .08”
• Diameter Min/Max: 4” / 11.8”
• Temperature Max: 80°C / 176°F
• Dimensions: 12.10”L x 5.80”W x 9.30”H
• Weight: 88.2 lbs