Manufacturer Part: | EMT ID: |
KPAC1411-2
|
13490
|
- 13,700 BTU/H – 1.15 Ton capacity air cooled
- Wide Operating range of 70ºF-110ºF
- Runs on 115V 15-amp circuit
- 3.5-gallon self-contained condensate reservoir tank
Description
The Model KPAC1411-2 (nominal 1.1-ton or 13,700 BTU) is the smallest unit in size and capacity in The KPAC II Series. The KPAC1411-2 has an extremely small foot print that is ideal for spot cooling people or equipment in a high ambient environment. The KPAC II Series offers a quick cooling solution with its “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation.
The KPAC II Series achieves a 20 degree F. temperature differential across its coil. This means that 95 degree F. input air will produce 75 degree F. output air. For spot cooling applications at a work station the unit will effectively cool a person or equipment within 5 to 7 feet of the unit. The KPAC1411-2 runs on a standard 115-volt/15-amp circuit with automatic restart after a power failure. The unit comes with a 3.5-gallon self-contained condensate tank with float activated unit cut off, that is manually emptied.
Features
- 13,700 BTU/H – 1.15 Ton capacity air cooled
- Compact yet Powerful
- Runs on 115V 15-amp circuit
- Wide Operating range of 70ºF-110ºF
- ETL and CETL listed to UL and CSA standards
- Single duct system for easy installation.
- Multi-function microprocessor control with a large, easy-to-read LCD display
- Easy-touch control pads make changing system settings a snap.
- 3.5-gallon self-contained condensate reservoir tank for easy removal and emptying.
- Condensate overflow protection with audible alarm
- Capillary tube construction for simplicity.
- Heavy duty compressor with automatic restart and short cycle protection.
- Motors and compressors have overload protection.
- High-pressure safety with manual reset.
- Automatic freeze protection using microprocessor freeze stat.
- Heavy-duty locking casters.
- Rifle tube coils for efficient heat transfer.
- Fully insulated, heavy duty galvanized steel cabinet with Kwikool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance and quiet operation.
- Filter dryer for Moisture protection
- Easy access Service Door
- Shraeder service ports.
Specifications
- COOLING CAPACITY
- BTU/hr @ 95F at 60% 13,700 (1.1-Ton)
- COMPRESSOR DATA
- Compressor Type: Hermetic Rotary
- Operating Temperatures: 70-105 F 50%RH
- Refrigerant: 410A
- FAN DATA
- Evaporator
- Fan Type (Centrifugal): Direct Drive
- Air Flow (CFM): 460/1 Speed
- Supply Air Device: 2 - 5" Dia. x 16" Air Chute
- Supply Air Duct max. length: 25'
- Condenser
- Fan Type (Centrifugal): Direct Drive
- Air Flow (CFM): 700
- Condenser Duct Specs (optional): 1 - 12" Dia. x 8' Length
- Condenser Duct Max. Length: 25'
- Evaporator
- ELECTRICAL DATA
- Power Supply (Volts): 115/Single Phase
- Current Consumption (Amps): 11.5
- Power Consumption (kW): 1.19
- Maximum Circuit Breaker (Amps): 20
- Recommended Breaker Size: 15 or 20
- Minimum Circuit Ampacity (Amps): 17.085
- Min./Max. Voltage: 105-125
- Power Cord Gauge/Length: 14/6'
- Plug Configuration: NEMA 5-15
- DIMENSIONAL DATA
- Width x Depth x Height (Inches): 16.325" x 26" x 37.25"
- Weight (Lbs.): 157
- Shipping Weight (Lbs.): 207
- Ceiling Kit Weight (Lbs.): 22
- Shipping Weight w/ Ceiling Kit: 229
- SAFETY DEVICE DATA
- Compressor Overload: Internal
- Fan Motor Overload: Automatic Internal
- Evaporator Freeze Protection: Freeze Stat
- High Pressure Switch: Manual
- Compressor Short Cycle: Yes
- Automatic Restart: Yes
- Thermostat Type: Microprocessor/Digital
- Condensate Pump Overflow: Optional
- Condensate Tank Overflow: Yes
Options
- CK-12S - Ceiling kit for models: KPAC1411-2 & KPAC1811-2 (available in accessories section)
Manufacturer | |
SKU |
KPAC1411-2
|
Shipping Method |
LTL Freight
|
Weight |
207 lb
|
Dimensions |
21 × 31 × 48 in
|
Country of Origin |
United States of America
|
Warranty |
1 Year
|