Hyrel 230V 750W Hydra H21 Enclosed 3D Printer H21

High Reliability - Low Maintenance - High Uptime - Heated Enclosure - Large Volume

• The Hydra 21 has a 300x400mm (optionally 400x500mm) bed, heated to 120°C (optionally 200°C).
• The enclosed build environment can be heated by the hotbed, and the filament storage protects your build and material from outside environmental changes
• The Hydra 21 printers work with all Hyrel print heads, allowing you to work with numerous materials, including store-bought or home-made filaments, clays, pastes, hydrogels, photo-initiators, and cementitious materials
• Designed with safety in mind
• Rugged, all-metal design
• Includes interchangeable mounting system
• Plug-and-play modular heads
• Ready for upgrade/expansion options
• Compatible with large volume extruders
• Hydra 21: 250mm Z, with the following bed options:
  • Bed 43W is 400×300, 120°C
  • Bed 43H is 400×300, 200°C
  • Bed 54W is 600×400, 120°C
  • Bed 54H is 600×400, 200°C
• Note: Hydra 21 models all come with a 300x300mm magnetic plate and a 300x300mm PEI-powder-coated spring-steel build surface. Printing on the larger heated bed area will require you to remove the magnetic plate and add 12mm of glass or other build surface.

What Is Included

• Enclosed HYREL 3D Printer with power cord
• USB ports for peripherals
• Five tool positions for print heads
• Tablet PC with Windows 10 and all software, firmware, and drivers installed and tested
• Large Heated Build Area
• Chamber Lighting
• Emergency Off (EMO) Button & Illuminated Control Panel

Specifications

• Spindle Tool Compatibility: Standard Three-Phase
• Placement Mechanism: Benchtop Model/Gantry Design
• Pick & Place Compatibility: Yes
• Max Chamber Temperatures: 65°C
• Enclosure: Heated to 55°C (by the hotbed)
• Build Volume: 16” x 12” x 10” (Optional 20” x 16” x 10”)
• Bed Temperature: 120°C
• Bed RTDs: 1k PLAT
• X/Y Printing Speeds: Up to 60 mm/sec
• X/Y Axes Motion Control: Precision Linear Bearing System
• Z Axis Motion Control: Three Precision Ball Screw
• Motion Control: 3-Phase with Closed-Loop Feedback
• Precise X/Y Output for Bioplots:
  • Lines: 100 microns
  • Spacing: 200 microns
• Precise Z Output for Bioplots: 25 microns layers
• Positional Resolution (minimum movement):
  • X Axis: 6 microns
  • Y Axis: 6 microns
  • Z Axis: 1 micron
• Positional Accuracy (full travel and return):
  • X Axis: 60 microns
  • Y Axis: 60 microns
  • Z Axis: 10 microns
• Positional Repeatability:
  • X Axis: 60 microns
  • Y Axis: 60 microns
  • Z Axis: 10 microns
• Electronics:
  • State-of-the-art 150+ MHz 32-bit ARM processor
  • Modular, micro-stepping motor-drivers with closed-loop encoding
  • Integrated, dual CAN-bus architecture
  • “Smooth Move” motion control technology firmware
• Tablet PC:
  • USB: Four USB 2.0 Ports (External)
  • WLAN: WiFi Capable
• Power Requirements: 8 A / 220-240 VAC / 50 Hz
• ATX Power Supply:
  • Power: 750 W
  • Voltage: 230 V
  • Current: 8 A
  • Frequency: 50 Hz
  • Physical On/Off Switch: Yes
  • IEC-60320 C14 connector
  • IEC-60320 C13-to-NEMA 15 Power Cable
  • US Standard (International must supply own)
• Chassis: Powder-coated Steel & Anodized Aluminum
• Enclosure: Plastic Windows
• Weight: 300 lbs.
• Dimensions (L x W x H): 42” x 24” x 33”

Options

• Build Volume 20” x 16” x 10”
• Bed Temperature 200°C (Note: 200°C Beds larger than 400 x 300 mm require 230VAC for optimal heating.)
• Bed Temperature -5°C
• 3-Phase Spindle Tool
• Chilled and/or Vacuum Beds
• Hydra 21: 250mm Z, with the following bed options:
  • Bed 43W is 400×300, 120°C
  • Bed 43H is 400×300, 200°C
  • Bed 54W is 600×400, 120°C
  • Bed 54H is 600×400, 200°C
• Reservoir Ambient: All EMO, SDS, DSD and SMH Heads
• Reservoir Temperature Control: All VOL, KRA, TAM, RSD, and HSD Heads
• Filament: All MK1-250, MK2-250 and MK1-450 Heads
• Low Power Laser: 6w, 450nm, GaN Diode and 2w, 450nm GaN Diode
• Quiet Storm Fan
• Microscope