Hyrel 115V 750W System 30M Enclosed 3D Printer 30M

High Reliability - Low Maintenance - High Uptime - Enclosure

• Protect your builds from outside environmental changes
• Enclosed build environment and filament storage
• The 30M printers work with all Hyrel print heads, allowing you to work with numerous materials, including store-bought or home-made filaments, clays, pastes, hydrogels, photo-initiators, and cementitious materials, but Hyrel 3D recommends the 16A for materials printed at over 300 °C
• Designed with safety in mind
• Rugged, all-metal design
• Includes interchangeable mounting system
• Plug-and-play modular heads
• Ready for upgrade/expansion options
• Compatible with large volume extruders
• Ideal for standard prints, multiple prints, exotic materials, and experimentation

What Is Included

• Enclosed HYREL 3D Printer with power cord
• Seven USB ports for peripherals
• Four tool positions for print heads
• Tablet PC on swivel mount with Windows 10 and all software, firmware, and drivers installed and tested
• 225 x 200 x 200 mm (8 x 8 x 8”) Build Area
• Chamber Lighting
• Tool Tree holds up to five additional heads
• Emergency Off (EMO) Button & Illuminated Control Panel

Specifications

• Spindle Tool Compatibility: Standard
• Placement Mechanism: Benchtop Model/Knee Design
• Pick & Place Compatibility: No
• Max Chamber Temperatures: ~10°C above ambient (Optional 55°C)
• Enclosure: Enclosed
• Build Volume: 8” x 8” x 8”
• Bed Temperature: 85-90°C
• Bed RTDs: 10k
• X/Y Printing Speeds: Up to 30 mm/sec
• X/Y Axes Motion Control: IKO Linear Bearing System
• Z Axis Motion Control: Precision Ball Screw
• Motion Control: 0.9° Stepping Motor w/ Closed-Loop Feedback
• Precise X/Y Output for Bioplots:
  • Lines: 100 microns
  • Spacing: 200 microns
• Precise Z Output for Bioplots: 25 microns layers
• Positional Resolution (minimum movement):
  • X Axis: 5 microns
  • Y Axis: 5 microns
  • Z Axis: 1 micron
• Positional Accuracy (full travel and return):
  • X Axis: 50 microns
  • Y Axis: 50 microns
  • Z Axis: 10 microns
• Positional Repeatability:
  • X Axis: 50 microns
  • Y Axis: 50 microns
  • Z Axis: 10 microns
• Electronics:
  • State-of-the-art 150+ MHz 32-bit ARM processor
  • Modular, micro-stepping motor-drivers
  • Integrated, dual CAN-bus architecture
  • “Smooth Move” motion control technology firmware
• Tablet PC:
  • USB: Four USB 2.0 Ports (External)
  • WLAN: WiFi Capable
• Power Requirements: 15 A / 110-120 VAC / 60 Hz
• ATX Power Supply:
  • Power: 750 W
  • Voltage: 115 V
  • Current: 16 A
  • Frequency: 60 Hz
  • Physical On/Off Switch: Yes
  • IEC-60320 C14 connector
  • IEC-60320 C13-to-NEMA 15 Power Cable
  • US Standard (International must supply own)
• Chassis: Powder-coated Steel & Anodized Aluminum
• Enclosure: Plastic Windows
• Weight: 50 lbs.
• Dimensions (L x W x H):
  • Out of the Box, Doors Open & LCD Fully Extended: 40” x 16” x 31”
  • Out of the Box, Doors Closed & LCD Fully Retracted: 35” x 16” x 31”

Options

• Enclosure heater to 55°C
• Reservoir Ambient: All EMO, SDS, DSD and SMH Heads
• Reservoir Temperature Control: All VOL, KRA, TAM, RSD, and HSD Heads
• Filament: All MK1-250, MK2-250 and MK1-450 Heads
• Low Power Laser: 6w, 450nm, GaN Diode and 2w, 450nm GaN Diode
• Quiet Storm Fan
• Microscope