Hyrel 230V 750W Engine HR High Resolution Unenclosed 3D Printer EHR

High Reliability - Low Maintenance - High Uptime - High Resolution

The EHR is Hyrel 3D’s High Resolution unenclosed printer designed for bioprinting on the desktop or inside of a fume hood. It is specifically engineered for microfluidics and bioplotting, and it is configured for wellplates and UV photoinitiation. This is ideal for biological research.

• Designed specifically with the needs of the Bioplotting / Bioprinting community in mind!
• The EHR printers work with all Hyrel print heads, allowing you to work with numerous materials, including store-bought or home-made filaments, clays, pastes, hydrogels, photo-initiators, and cementitious materials, but they recommend the 16A for materials printed at over 300 °C
• Designed with safety in mind
• Rugged, all-metal design
• Includes interchangeable mounting system
• Plug-and-play modular heads
• Ready for upgrade/expansion options
• Compatible with large volume extruders
• Please note that thermoplastics like ABS, PLA, Nylon, NinjaFlex, FilaFlex, etc. do much better with a heated enclosure
• 1.25 micron (or better) resolution in all axes.

What Is Included

• HYREL 3D Printer with power cord
• Seven USB ports for peripherals
• Four tool positions for print heads
• Tablet PC with Windows 10 and all software, firmware, and drivers installed and tested
• 100 x 100 x 100 mm (4 x 4 x 4”) Build Area

Specifications

• Heated Build Platform: Yes
• Placement Mechanism: Desktop Model/Knee Design
• Pick & Place Compatibility: No
• Max Chamber Temperatures: No Chamber
• Enclosure: Unenclosed
• Initial Heads: 1
• Maximum Heads: 3
• Build Volume: 4” x 4” x 4”
• Bed Temperature: 100°C
• Bed RTDs: 1k PLAT
• X/Y Printing Speeds: Up to 15 mm/sec
• X/Y Axes Motion Control: Precision Ball Screws
• Z Axis Motion Control: Precision Ball Screw
• Motion Control: 0.9° Stepping Motor w/ Closed-Loop Feedback
• Precise X/Y Output for Bioplots:
  • Lines: 50 microns
  • Spacing: 100 microns
• Precise Z Output for Bioplots: 25 microns layers
• Positional Resolution (minimum movement):
  • X Axis: 1.25 microns
  • Y Axis: 1.25 microns
  • Z Axis: 1 micron
• Positional Accuracy (full travel and return):
  • X Axis: +/- 12 microns
  • Y Axis: +/- 12 microns
  • Z Axis: +/- 10 microns
• Positional Repeatability:
  • X Axis: 12 microns
  • Y Axis: 12 microns
  • Z Axis: 5 microns
• Electronics:
  • State-of-the-art 150+ MHz 32-bit ARM processor
  • Modular, micro-stepping motor-drivers with closed-loop encoding
  • Integrated, dual CAN-bus architecture
  • “Smooth Move” motion control technology firmware
• Tablet PC:
  • USB: Four USB 2.0 Ports (External)
  • WLAN: WiFi Capable
• Power Requirements:
  • 5 A / 220-240 VAC / 50 Hz
• ATX Power Supply:
  • Power: 750 W
  • Voltage: 230 V
  • Current: 8 A
  • Frequency: 50 Hz
  • Physical On/Off Switch: Yes
  • IEC-60320 C14 connector
  • IEC-60320 C13-to-NEMA 15 Power Cable
  • US Standard (International must supply own)
• Chassis: Powder-coated Steel & Anodized Aluminum (no enclosure)
• Weight: 55 lbs.
• Exterior Dimensions, Closed (L x W x H): 13” x 20” x 19”

Options

• Reservoir Ambient: All EMO, SDS, DSD and SMH Heads
• Reservoir Temperature Control: All VOL, KRA, TAM, RSD, and HSD Heads
• Filament: All MK1-250, MK2-250 and MK1-450 Heads
• Low Power Laser: 6w, 450nm, GaN Diode and 2w, 450nm GaN Diode
• Quiet Storm Fan
• Microscope
• Chilled Cold Bed
• Bed Temperature 200°C
• Bed Temperature -5°C
• 5 Tool Positions
• 4th A Axis (Lathe)