Hyrel 230V 750W Engine SR Standard Resolution Unenclosed 3D Printer ESR

High Reliability - Low Maintenance - High Uptime

The ESR is Hyrel 3D’s leading unenclosed desktop printer. They work with all Hyrel print heads, allowing you to work with numerous materials, including store-bought or home-made filaments, clays, pastes, hydrogels, photo-initiators, and cementitious materials, but Hyrel 3D recommends the 16A for materials printed at over 300 °C.

• Designed with safety in mind
• Rugged, all-metal design
• Includes interchangeable mounting system
• Plug-and-play modular heads
• Ready for upgrade/expansion options
• Compatible with large volume extruders
• Not recommended for thermoplastics. Please note that thermoplastics like ABS, PLA, Nylon, NinjaFlex, FilaFlex, etc. do much better with a heated enclosure.

What Is Included

• HYREL 3D Printer with power cord
• Seven USB ports for peripherals
• Four tool positions for print heads
• Tablet PC with Windows 10 and all software, firmware, and drivers installed and tested
• 225 x 200 x 200 mm (8 x 8 x 8”) Build Area

Specifications

• Spindle Tool Compatibility: Standard
• Heated Build Platform: Yes
• Placement Mechanism: Desktop Model/Knee Design
• Pick & Place Compatibility: No
• Max Chamber Temperatures: No Chamber
• Enclosure: Unenclosed
• Initial Heads: 1
• Maximum Heads: 4
• Build Volume: 8” x 8” x 8”
• Bed Temperature: 85-90°C
• Bed RTDs: 10k
• X/Y Printing Speeds: Up to 30 mm/sec
• X/Y Axes Motion Control: Belts
• Z Axis Motion Control: Precision Ball Screw
• Motion Control: 0.9° Stepping Motor w/ Closed-Loop Feedback
• Precise X/Y Output for Bioplots:
  • Lines: 100 microns
  • Spacing: 200 microns
• Precise Z Output for Bioplots: 25 microns layers
• Positional Resolution (minimum movement):
  • X Axis: 5 microns
  • Y Axis: 5 microns
  • Z Axis: 1 micron
• Positional Accuracy (full travel and return):
  • X Axis: 50 microns
  • Y Axis: 50 microns
  • Z Axis: 10 microns
• Positional Repeatability:
  • X Axis: 25 microns
  • Y Axis: 25 microns
  • Z Axis: 5 microns
• Electronics:
  • State-of-the-art 150+ MHz 32-bit ARM processor
  • Modular, micro-stepping motor-drivers with closed-loop encoding
  • Integrated, dual CAN-bus architecture
  • “Smooth Move” motion control technology firmware
• Tablet PC:
  • USB: Four USB 2.0 Ports (External)
  • WLAN: WiFi Capable
• Power Requirements: 5 A / 220-240 VAC / 50 Hz
• ATX Power Supply:
  • Power: 750 W
  • Voltage: 230 V
  • Current: 8 A
  • Frequency: 50 Hz
  • Physical On/Off Switch: Yes
  • IEC-60320 C14 connector
  • IEC-60320 C13-to-NEMA 15 Power Cable
  • US Standard (International must supply own)
• Chassis: Powder-coated Steel & Anodized Aluminum (no enclosure)
• Weight: 50 lbs.
• Exterior Dimensions, Closed (L x W x H): 13” x 21” x 22”

Options

• Reservoir Ambient: All EMO, SDS, DSD and SMH Heads
• Reservoir Temperature Control: All VOL, KRA, TAM, RSD, and HSD Heads
• Filament: All MK1-250, MK2-250 and MK1-450 Heads
• Low Power Laser: 6w, 450nm, GaN Diode and 2w, 450nm GaN Diode
• Quiet Storm Fan
• Microscope