Ercolina 220V Three Phase Hydraulic Positioning Angle Roll Bender with 2½” Pipe Bending Capacity and Universal Tooling CE50H3

Description

Ercolina’s CE50H3 angle roll model offers hydraulic center roll positioning. 

Ercolina’s affordable tube benders and fabricating machines are designed to reliably and accurately produce your bending applications. As a result, Ercolina machines will increase profit, as well as improve product quality and finish. 

Features

• Bending speeds 20% faster than competitive machines 
• Universal tooling set included with each machine 
• Forged roll shafts precision ground and fitted for maximum performance and minimal deflection
• Roll shafts supported with conical steel bearings on each side of A Frame 
• Heavy duty structure and rigid components for high section modulus ratings 
• Reinforced engineered mainframe design proven to outperform competitive models 
• In-line direct drive roll shaft system 3-roll driven
• Threaded roll shafts with micrometric flange adjustment helps eliminate spacer usage 
• Touchpad controls with digital center roll positioning 
• Control tower with low voltage controls and foot pedal 
• Hydraulic machine with memory storage has eight (8) individual programs and unlimited passes 
• Patented by Ercolina, simultaneous downfeed and roll movement minimizes deformation

Specifications

• Pipe Capacity (max): 2½” Sch. 40
• Angle Capacity (max):  2½” x 2½” x ¼”
• Tube Capacity (max): 3” (0.095 wall)
• Roll Shaft Diameter: 50mm
• Center Roll Positioning: Hydraulic / 10 Tons
• Shaft Speed: 9 RPM
• Universal Tooling (Included): 7” OD
• Programming: NC – Touchpad 
• Number of Programs: 8
• Distance between Shafts: 11⅞″
• Operating Voltage: 220V Three Phase 
• Dimensions (LxWxH): 45” x 29” x 52” 
• Weight: 1100 lbs

Tooling Included

• Pipe
  • Profile Dimensions: ¾”
    • Min CLR: 8” 
    • Wall: 0.113
  • Profile Dimensions: 2”
    • Min CLR: 14”
    • Wall: 0.154
  • Profile Dimensions: 2½”
    • Min CLR: 18”
    • Wall: 0.203
• Tube
  • Profile Dimensions: 1”
    • Min CLR: 6”
    • Wall: 0.120
  • Profile Dimensions: 2½”
    • Min CLR: 18”
    • Wall: 0.120
  • Profile Dimensions: 3”
    • Min CLR: 24”
    • Wall: 0.120
• Square Tube
  • Profile Dimensions: ¾” x ¾”
    • Min CLR: 6”
    • Wall: 0.083
  • Profile Dimensions: 2” x 2”
    • Min CLR: 20”
    • Wall: 0.120
  • Profile Dimensions: 2½” x 2½”
    • Min CLR: 30”
    • Wall: 0.120
• Rectangular Tube (Hard Way)
  • Profile Dimensions: ½” x 1”
    • Min CLR: 8”
    • Wall: 0.083
  • Profile Dimensions: 1½” x 2½”
    • Min CLR: 18”
    • Wall: 0.120
  • Profile Dimensions: 1½” x 3”
    • Min CLR: 34”
    • Wall: 0.120
• Rectangular Tube (Easy Way)
  • Profile Dimensions: 1¼” x ½”
    • Min CLR: 10”
    • Wall: 0.083
  • Profile Dimensions: 2½” x 1½”
    • Min CLR: 24”
    • Wall: 0.120
  • Profile Dimensions: 3” x 1½”
    • Min CLR: 32”
    • Wall: 0.120
• Round Solid
  • Profile Dimensions: ¾”
    • Min CLR: 4” (special tooling required)
  • Profile Dimensions: 1½”
    • Min CLR: 14”
• Square Solid
  • Profile Dimensions: ¾”
    • Min CLR: 4” (special tooling required)
  • Profile Dimensions: 1¼”
    • Min CLR: 10”
  • Profile Dimensions: 1½”
    • Min CLR: 6”
• Rectangular Solid (Hard Way)
  • Profile Dimensions: ⅜″ x ¾″
    • Min CLR: 6” (special tooling required)
  • Profile Dimensions: ½” x 2” 
    • Min CLR: 10”
  • Profile Dimensions: ½” x 2½”
    • Min CLR: 18”
• Rectangular Solid (Easy Way)
  • Profile Dimensions: 2” x ½”
    • Min CLR: 8”
  • Profile Dimensions: 4” x ½”
    • Min CLR: 12”
• Angle “Leg Out” 
  • Profile Dimensions: 1” x 1”
    • Min CLR: 8”
    • Wall: 0.120
  • Profile Dimensions: 2” x 2”
    • Min CLR: 16”
    • Wall: 0.187
  • Profile Dimensions: 2½” x 2 ½”
    • Min CLR: 20”
    • Wall: 0.187
• Angle “Leg In” 
  • Profile Dimensions: 1” x 1”
    • Min CLR: 12”
    • Wall: 0.120
  • Profile Dimensions: 2” x 2”
    • Min CLR: 24”
    • Wall: 0.236
  • Profile Dimensions: 2½” x 2 ½”
    • Min CLR: 32”
    • Wall: 0.236
• C “Leg Out” 
  • Profile Dimensions: 1¼” x ½”
    • Min CLR: 10”
    • Wall: 0.120
  • Profile Dimensions: 3” x 1½”
    • Min CLR: 16”
    • Wall: 0.187
• C “Leg In”
  • Profile Dimensions: 1½” x ¾”
    • Min CLR: 10”
    • Wall: 0.187
  • Profile Dimensions: 3” x 1½”
    • Min CLR: 16
    • Wall: 0.187

Options

• Anti-twist correction system required for angle iron “Leg In” applications 
• Small Radius Tooling (C5RR)
• Fabricator’s measuring set (KARC)