Ebac Industrial CD425-D 3680W 440V Three Phase Large Area Industrial Dehumidifier 10148BR-US
Manufacturer Part: | EMT ID: |
10148BR-US
|
17007
|
- Effective Volume: 52,970 cu.ft
- Typical Extraction: 285 ppd
- Airflow: 1,750 CFM
- Power Supply: 3680W, 60 Hz, 440V Three Phase
Description
The EIPL CD425-D range of units were developed to serve the demands of industry for environmental control of very large areas in addition to areas affected by severe conditions. Warehouses, factories, offices and other large scale facilities with ambient temperatures ranging from 33°F to 95°F can be cured of humidity and condensation problems efficiently and automatically without over burdening costly heating, cooling and ventilation systems. The CD425-D units can be utilized singly or in multiple units to provide protection on any scale. Ducted applications are possible where design requirements specify. The EIPL CD425-D range of dehumidifiers are “stand alone” units that can handle the extra load encountered in the typical humid, industrial settings. Under maximum conditions, the CD425-D will condense and remove up to 50 gallons of water vapor per day – day after day. With “Reverse Cycle” defrosting, this workhorse can function smoothly in a cold, wet location, without the limitations of frost buildup.
Application
- Warehouse
- Factories
- Sports Halls
- Storage Areas
- Laboratories
- Oil Rigs
- Agriculture
- Pumping Stations
- Stadiums
- Ships / Barges
How the CD425-D Works
EIPL dehumidifiers are effective solutions to environmental control problems. The CD425-D range of units are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. The CD425-D allows a specific humidity level to be entered and also provides an actual display of the room humidity level. The CD425-D range of units will self regulat the drying required, and automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.
Features
- Digital Humidity Control
- Welded steel chassis with baked epoxy-coated and vinyl coatings for abrasion and corrosion resistance
- An adjustable humidistat to control the level of dryness desired
- System lamps to report the operating status of the unit
- EIPL’s unique “Reverse Cycle” defrosting system, for effective operation in low ambient temperatures down to 33°F
- Ductability
- Rugged design for harsh industrial environments
- On/Off Control
- Electronic Defrost Control
- Compressor Restart Delay Timer
- Compressor Type: Reciprocating
- Free Standing
- Status Indicators
- Power On Indicator
- Epoxy Powder Coating
- Gravity Drain (2 X 5/8” O/D)
Specifications
- Height: 47” (1193mm)
- Width: 43” (1092mm)
- Depth: 19” (482mm)
- Weight: 353 lbs (160kg)
- Voltage: 440V
- Phase: 3
- Frequency: 60 Hz
- Current: 16A
- Power: 3680W
- Airflow: 1,750 CFM (2,975m3/hr)
- Noise Level: 69 dba
- Refrigerant: R407c
- Effective Volume: 52,970 cu.ft (1,500m3)
- Typical Extraction: 285 ppd
- Min Operating Temp: 33°F (1°C)
- Max Operating Temp: 95°F (35°C)
Manufacturer | |
SKU |
10148BR-US
|
UPC |
817016022632
|
EAN |
5060487662639
|
Shipping Method |
LTL Freight
|
Weight |
353 lb
|
Dimensions |
46 × 21 × 56 in
|
Country of Origin |
United Kingdom
|
Warranty |
1 Year
|